JVC RX7030VBK manual Dual Mono format is not identical with bilingual

7Low frequency effect attenuator—LFE ATTENUATE

If the bass sound is distorted while playing back software encoded with Dolby Digital or DTS, set the LFE level to eliminate distortion.

Select one of the following:

0dB: Normally select this.

−10dB: Select when the bass sound is distorted.

Selecting main or sub channel—DUAL MONO

Select the playback sounds (channel).

MAIN: Select to play back the main channel (Ch1).*1 Signal indicator “L” lights up while playing back this channel.

SUB: Select to play back the sub-channel (Ch2).*1 Signal indicator “R” lights up while playing back this channel.

ALL: Select to play back both the main and sub-channels (Ch1/Ch2).*1

Signal indicators “L” and “R” light up while playing back these channels.

Notes:

•The Dual Mono format is not identical with bilingual

broadcasting or the MTS (Multichannel Television Sound) format used for TV programs. So this setting does not take effect while watching bilingual or MTS programs.

*1 Dual Mono signals can be heard from the following speakers— L (left front speaker), R (right front speaker), and C (center speaker)—with respect to the current Surround setting.

With Surround Activated

Dual Mono

Without Surround

Center speaker setting

Setting

SMALL/LARGE

NONE

L

R

L

C

R

L

R

MAIN

Ch 1

Ch 1

—

Ch 1

—

Ch 1

Ch1

SUB

Ch 2

Ch 2

—

Ch 2

—

Ch 2

Ch 2

ALL

Ch 1

Ch 2

—

Ch 1+Ch 2

—

Ch 1+Ch 2

Ch 1+Ch 2

Setting the Digital Input Terminals

When you use the digital input terminals, register which components you have connected to the digital input terminals.

7Digital coaxial terminal—DGTL IN COAX

Set the component connected to the digital coaxial terminal (DIGITAL IN 1).

•For RX-8030VBK:DVD (initial setting), MD*, CDR, TV (or DBS**) or CD.

•For RX-7030VBK:DVD (initial setting), CD, TV (or DBS**) or CDR.

7Digital optical terminals—DGTL IN OPTICAL

For RX-8030VBK:

Set the components connected to the digital optical terminals (DIGITAL IN 2 – 4).

•As you rotate MULTI JOG, the digital optical input terminals are set to used for following digital components:

When “DIGITAL IN 1 (DGTL IN COAX)” is set to “DVD”

2: CD	3: TV (or DBS** )	4: CDR	“
2: CD	3: TV (or DBS**)	4: MD*	“
2: CD	3: MD*	4: CDR	“
2: MD*	3: TV (or DBS** )	4: CDR	“

(back to the beginning)

When “DIGITAL IN 1 (DGTL IN COAX)” is set to “CD”

2: DVD	3: TV (or DBS**)	4: CDR	“
2: DVD	3: TV (or DBS**)	4: MD*	“
2: DVD	3: MD*	4: CDR	“
2: MD*	3: TV (or DBS**)	4: CDR	“

(back to the beginning)

When “DIGITAL IN 1 (DGTL IN COAX)” is set to “TV” or “DBS”**

2: CD	3: DVD	4: CDR	“
2: CD	3: DVD	4: MD*	“
2: CD	3: MD*	4: CDR	“
2: MD*	3: DVD	4: CDR	“

(back to the beginning)

When “DIGITAL IN 1 (DGTL IN COAX)” is set to “CDR”

2: CD	3: TV (or DBS**)	4: DVD	“
2: CD	3: TV (or DBS**)	4: MD*	“
2: CD	3: MD*	4: DVD	“
2: MD*	3: TV (or DBS**)	4: DVD	“

(back to the beginning)

When “DIGITAL IN 1 (DGTL IN COAX)” is set to “MD”*

2: CD	3: TV (or DBS**)	4: CDR	“
2: CD	3: TV (or DBS**)	4: DVD	“
2: CD	3: DVD	4: CDR	“
2: DVD	3: TV (or DBS**)	4: CDR	“

(back to the beginning)

*When connecting an MD recorder to the digital input terminal, change the source name to “MD” from “TAPE” (see page 21).

**If you have changed the source name from “TV” to “DBS,” “DBS” appears (see page 21).

English

29