JVC RX7030VBK manual Adjusting the Equalization Patterns

English

Adjusting the Equalization Patterns

You can adjust the equalization patterns to your preference.

•Once you have made adjustment, it is memorized for each source.

7Equalization adjustment—DIGITAL EQ

You can adjust five frequency (63 Hz, 250 Hz, 1 kHz,

4 kHz, 16 kHz) within the range of –8 dB to +8 dB (“0 dB” is the initial setting) in 2 dB steps.

•When adjustment is made, the DIGITAL EQ indicator lights up on the display.

To flat the equalization pattern, set all the frequency to “0 dB” in step 4 of “Basic Procedure” (on page 31). The DIGITAL EQ indicator goes off from the display.

Notes:

•When Analog Direct is in use, Digital Equalization patterns are not available.

•The Digital Equalization affects the front speaker sounds only.

You can also use the remote control for equalization adjustment.

1 2 3

4 5 6

7/P 8 9

10/0 0 +10

1.Press SOUND.

The 10 keys are activated for sound adjustments.

2.Press DIGITAL EQ (Equalization) repeatedly to select the center frequency you want to adjust.

•Each time you press the button, the center frequency with its current level appear on the display

3.Press LEVEL + or – repeatedly to adjust the level of the center frequency.

The DIGITAL EQ indicator lights up on the display.

•The frequency level changes from –8 dB to +8 dB in 2 dB steps.

4.Repeat steps 2 and 3 to adjust the other center frequency.

Adjusting the Speaker Output Levels

You can adjust the speaker output levels. The test tone comes out of each speaker except subwoofer to check the output level balance when using the Surround mode.

•Once you have made an adjustment, it is memorized for each source.

7Adjustable speakers

You can adjust the following speakers’ output levels within the range of –10 dB to +10 dB (“0 dB” is the initial setting):

SUBWFR LVL : Select to adjust the subwoofer output level.

FRONT L LVL: Select to adjust the left front speaker output level.

FRONT R LVL: Select to adjust the right front speaker output level.

CENTER LVL: Select to adjust the center speaker output level.

SURR L LVL: Select to adjust the left surround speaker output level.

SURR R LVL: Select to adjust the right surround speaker output level.

SBACK LVL: Select to adjust the surround back speaker output level.

Notes:

•If you have selected “NO” or “NONE” for a speaker (see page 27), the output level for the corresponding speaker is not adjustable.

•The center speaker, and left/right surround speakers’ output levels are adjustable for DVD MULTI playback mode, even though “NONE” is selected for the speaker settings.

•Speaker output levels (except the subwoofer output level) are not adjustable when Analog Direct is in use. To adjust subwoofer output level, see page 19.

32