JVC SP-DW103 manual Connections, Checking Your Amplifier, Connecting to the Amplifier, English

English

Connections

Checking Your Amplifier

Before connecting this unit to your amplifier (or receiver), check what types of connecting terminals your amplifier has.

Follow the instructions below to find a proper connection method for your equipment.

•Illustrations of jacks and terminals in this manual may be different from the ones actually used for your amplifier. The illustrations are of the most used type.

First check whether your amplifier has a subwoofer output jack.

It is usually named and printed as the “SUBWOOFER OUT” or “SUBWOOFER.”

SUBWOOFER

OUT

If you find it on your amplifier, follow Connecting Method Å.

If you cannot

find any

Next check whether your amplifier has line output jacks.

They are usually named and printed as “LINE OUT” or “LINE OUTPUT.”

LINE OUT

L

R

If you find them on your amplifier, follow Connecting Method ı.

If you cannot

find any

Follow Connecting Method Ç.

This connection can be used for any amplifier, by connecting the front speaker terminals of the amplifier (usually named and printed as “FRONT SPEAKERS” or “MAIN SPEAKERS”).

FRONT SPEAKERS

1

Before connecting this unit to the amplifier (or receiver), observe the following carefully.

•Before connecting this unit to an amplifier, turn off the amplifier first.

•Make all connections before plugging in this unit.

•DO NOT use the INPUT 1 (LOW-LEVEL) and INPUT 2 (HIGH-LEVEL) terminals on the rear of this unit at the same time; otherwise, noise will be heard and may damage the unit.

•DO NOT connect this unit to the REC OUT jacks of your amplifier.

Connecting to the Amplifier

When connecting to your amplifier (or receiver), refer also the manual supplied for your equipment.

Connecting Method Å

Connect an amplifier having a subwoofer output jack to the LEFT/MONO jack of the INPUT 1 (LOW-LEVEL) terminal.

Preparation:

Use the supplied monaural audio cord.

Main (Front) Speakers (not supplied)

					SUBWOOFER
					OUT
Your Amplifier
					Monaural audio cord
					(supplied)
VOLUME	FREQUENCY
MIN	50Hz
MAX	200Hz
PHASE		CUT OFF FILTER
	NORMAL		VARIABLE
	REVERSE		FIXED
AUTO POWER ON/STANDBY
	RIGHT	LEFT/MONO
ON			INPUT 1
CANCEL			(LOW-LEVEL)	RIGHT	LEFT/MONO
RIGHT			LEFT
			INPUT 2		INPUT 1
			(HIGH-LEVEL)
			TO MAIN		(LOW-LEVEL)
			SPEAKERS
RIGHT			LEFT
POWER
OFF	ON
SP-DW103				To an AC outlet

2

RIGHTLEFT

When using Connecting Method Å, no signal comes out of the TO MAIN SPEAKERS terminal.

– 4 –