Connecting Method ı
Connect an amplifier having line output jacks to the INPUT 1
Preparation:
Purchase a stereo audio cord at an audio shop or electric shop.
English
FRONT SPEAKERS
1
2
RIGHTLEFT
Your Amplifier
Main (Front) Speakers (not supplied)
LINE OUT
L
R
VOLUME | FREQUENCY | |
MIN | 50Hz |
|
MAX | 200Hz |
|
PHASE |
| CUT OFF FILTER |
| NORMAL | VARIABLE |
| REVERSE | FIXED |
AUTO POWER ON/STANDBY |
| |
| RIGHT | LEFT/MONO |
ON |
| INPUT 1 |
CANCEL |
| |
| ||
RIGHT |
| LEFT |
|
| INPUT 2 |
|
| |
|
| TO MAIN |
|
| SPEAKERS |
RIGHT |
| LEFT |
POWER |
|
|
OFF | ON |
|
|
To an AC outlet
Speaker cords (not supplied)
RIGHT |
|
|
|
|
| LEFT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RIGHT | LEFT |
INPUT 2
TO MAIN SPEAKERS
Your Amplifier
Speaker cords (not supplied)
VOLUME | FREQUENCY | |
MIN | 50Hz |
|
MAX | 200Hz |
|
PHASE |
| CUT OFF FILTER |
| NORMAL | VARIABLE |
| REVERSE | FIXED |
AUTO POWER ON/STANDBY |
| |
| RIGHT | LEFT/MONO |
ON |
| INPUT 1 |
CANCEL |
| |
RIGHT |
| LEFT |
|
| INPUT 2 |
|
| |
|
| TO MAIN |
|
| SPEAKERS |
RIGHT |
| LEFT |
POWER |
|
|
OFF | ON |
|
|
Stereo audio cord (not supplied)
RIGHT LEFT/MONO
INPUT 1
To an AC outlet
Main (Front) Speakers (not supplied)
Right speaker | Left speaker |
How to connect the speaker cords:
1Press and hold the clamp of the speaker terminal.
2Insert the end of the speaker cord into the terminal as illustrated below.
•Match the polarity of the speaker terminals: ª to ª and · to ·.
3Release the finger from the clamp.
1 | 2 | 3 |
If your amplifier has only a monaural line output (MONO) jack, connect it to the LEFT/MONO jack of the INPUT 1
Connecting Method Ç
Connect an amplifier without a subwoofer output jack and line output jacks to the INPUT 2
•When this method is used, connect your main (front) speakers to the TO MAIN SPEAKERS terminal on the rear of this unit.
Preparation:
Purchase speaker cords at an audio shop or electric shop.
•When you connect main (front) speakers to the TO MAIN SPEAKERS terminal, use the speakers within the impedance range indicated by the amplifier connected to the INPUT 2
•DO NOT connect more than one speaker to one speaker terminal.