ENGLISH

Additional Information

Speaker layout

To obtain the best possible sound from your unit:

—Place a subwoofer wherever you like since bass sound is non-

 

 

 

directional. Normally place it in front of you.

 

 

Subwoofer

—Place all the main speakers at the same distance from the

Left front

Center

Right front

listening position.

speaker

speaker

speaker

 

 

 

< Only for SP-DWF10 >

—Be sure to place the powered subwoofer to the TV's right. If you place the powered subwoofer to the TV's left, keep sufficient distance between them to prevent the TV from appearing mottled.

 

Listening position

Left surround

Right surround

speaker

speaker

English

Troubleshooting

Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your dealer.

Power does not come on.

•Is the unit pugged in?

– Plug the AC power cord firmly into the AC outlet.

Auto Power On/Standby does not function correctly.

•Signals are too weak or volume level is too low.

– This is not a malfunction. If this happens, cancel Auto Power On/Standby.

No sound is heard.

•Connections are incorrect, or loose.

–Check the connections. If incorrect, redo the corrections. (See pages 8.)

•Audio signals through the amplifier are extremely weak.

–Increase the volume level on the amplifier.

Sounds fluctuate (suddenly become loud or soft).

•The built-in protective circuit is working.

– Lower the volume level, then turn off and on the unit.

Suddenly no sound comes out. – the power lamp still lights in green.

•The volume of the playback source is too high.

– Turn down the volume of the playback source, turn off and on the source, then adjust the volume properly on the source.

Specifications

SP-PWE5

Type : Powered Subwoofer Bass-reflex type (magnetically shielded type)

Speaker : 16.0 cm cone ⋅ 1 Frequency Range : 25 Hz 200 Hz

Impedance : 4 Ω

Input terminals : INPUT (LOW-LEVEL)Power requirements : AC 230 V, 50 Hz

Output power of built-in amp : 60 W (70 Hz, 4 Ω, 10 % THD) Power Handling Capacity : 30 W

Dimensions

(W ⋅ H ⋅ D) : 214 mm ⋅ 299 mm ⋅ 340 mm Mass : 8.1 kg

Accessories : Monaural audio cord (⋅ 1)

SP-DWF10

Type : Powered Subwoofer Bass-reflex type (magnetically shielded type)

Speaker : 16.0 cm cone ⋅ 1 Frequency Range : 32 Hz 200 Hz

Impedance : 4 Ω

Input terminals : INPUT (LOW-LEVEL)Power requirements : AC 230 V, 50 Hz

Output power of built-in amp : 100 W (50 Hz, 4 Ω, 10 % THD) Power Handling Capacity : 27 W

Dimensions

(W ⋅ H ⋅ D) : 185 mm ⋅ 374 mm ⋅ 385 mm Mass : 8.86 kg

Accessories : Monaural audio cord (⋅ 1)

– 9 –