Continued
English
AM antenna
ANTENNA | ||
(not supplied) | ||
| ||
| AM | |
| LOOP | |
AM |
| |
EXT |
| |
FM 75 |
| |
COAXIAL |
| |
AM loop antenna (supplied) |
Connecting Speakers
You can connect the speakers using the speaker cords.
1 | 2, 3 | |
|
| Red |
Speaker Cord |
| Speaker Cord |
|
| |
RIGHT | LEFT | SPEAKERS |
| ||
Black |
| |
Right speaker |
| Left speaker |
1 Connect the AM loop antenna to the AM LOOP terminals as illustrated.
2 Turn the AM loop antenna until you have the best reception.
To connect an external AM antenna
When reception is poor, connect a single
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other terminals and connecting cables.
•Keep the antennas away from metallic parts of the units, connecting cables, and the AC power cord.
1 Open the speaker terminal.
2 Insert the end of the speaker cord to the terminal.
Match the polarity of the speaker terminals: Red (+) to red (+) and black
3 Close the speaker terminal on the rear of the unit.
When connecting speaker cords
• Make sure to connect the cords correctly following the right series of above steps.
During operation, wrong connection or a short circuit make the power turned off to protect the system.
The clock loses the setting and is reset to “0:00”. Also the MD recording may fail.
•Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.
8