Connections

Do not connect the power cord until all other connections have been made.

Connecting the video components for the source of VIDEO 3

7To connect the video components for the source of VIDEO 3

• You can get better picture quality in the order — S-video > Composite video.

Center unit

Align the 5 marks.

RCA pin plug cord

(not supplied)

Digital optical audio cord (not supplied)

S-video cord (not supplied)

or

Composite video cord (supplied)

To composite

To S-video

video output

output

Game console or

camcorder

To analog audio output

To digital optical audio

output

NOTE

•Unify the way of TV connection and that of video component’s (for example, connect a video component through S-VIDEO jack when TV is connected through S-VIDEO jack). Otherwise, the signal from the component is not sent to the TV.

•When playback from USB source, scanning mode can be adjusted to have better picture quality. (See page 18.)

•If you connect a sound-enhancing device such as a graphic equalizer between the source components and this system, the sound output through this system may be distorted.

•When shipped from the factory, the source of “VIDEO 3” have been set for use with the VIDEO 3 AUDIO L/R audio terminal for the audio connection. If you connect the components with digital optical audio cord, change the audio input (VIDEO 3) setting to “DIGITAL.” (See page 31.)

12