See page 16 for button locations.
CAUTION
•Always set the volume to minimum level before starting any source. If the volume is set at a high level, the sudden blast of sound may damage your hearing and/or blow out the speakers.
On the remote control:
Press AUDIO VOLUMEOn the center unit:
Press VOLUMECAUTION
Be sure to turn down the volume;
•Before connecting or putting on headphones as high volume may damage both the headphones and your hearing.
•Before disconnecting headphones as high volume may suddenly come out of the speakers.
While connecting a pair of headphones to the PHONES jack on the center unit, the system automatically cancels the surround mode (see page 27) currently selected, deactivates the speakers, and activates the headphone mode. “HEAD PHONE” appears on the display window.
Headphone modeWhen using the headphones, the following signals come out regardless of your speaker setting;
•For 2 channel sources, the front left and right channel signals are come out from the headphones.
•
Perform one of the following:
•Press MUTING again.
•Press AUDIO VOLUME
•Press VOLUME +/– on the center unit.
Each time you press the button, you can change the brightness level in 3 steps.
Sleep Timer [SLEEP]The system turns off automatically when the specified period of time has passed.
Press SLEEP repeatedly.Each time you press the button, the
–– (Canceled) Z (back to the beginning)
•The SLEEP indicator lights up on the display. Example:
SLEEP indicator
Press SLEEP once.
To change the remaining timePress SLEEP repeatedly.
To cancelPress SLEEP repeatedly, until “SLEEP –
•The SLEEP indicator goes off.
•Turning off the power also cancels the Sleep Timer.
17