Operating the TV and DVD player
You can use the remote control to operate not only this unit but also JVC and other manufacturers’ TV and DVD player.
•Refer also to the manuals supplied for the TV and DVD player.
•To operate the equipment, aim the remote control directly at the remote sensor on the target equipment.
Number
buttons
NOTE
• Manufacturers’ codes are subject to change without notice.
Operating the TV
7To set the manufacturer’s code1 Press and hold TV.Press and hold the button until step 3 is finished.
2 Press ENTER.For an AKAI TV: Press 0, then 2.
For a FISHER TV: Press 1, then 7.
*01 is the initial setting.
JVC | 01* | PHILIPS | 29 | |
|
|
|
| |
AKAI | 02, 17 | PIONEER | 42 | |
|
|
|
| |
DAEWOO | 08, 09, 29 | RCA | 02, 20, 46, | |
47, 48, 49 | ||||
|
|
| ||
FISHER | 17 | SAMSUNG | 29, 51, 52, | |
71, 72, 73, | ||||
|
|
| 74 | |
HITACHI | 24, 26 | SANYO | 17 | |
|
|
|
| |
IRRADIO | 17 | SCHNEIDER | 17 | |
|
|
|
| |
MAGNAVOX | 29 | SHARP | 54 | |
|
|
|
| |
MARANTZ | 30 | SONY | 55 | |
|
|
|
| |
MITSUBISHI | 30 | TOSHIBA | 53 | |
|
|
|
| |
PANASONIC | 39, 41 | ZENITH | 69, 70 | |
|
|
|
|
If there is more than one code listed for corresponding brand, try each one until you enter the correct one.
7To operate a TVYou can perform the following operations on the TV.
|
| TV | Turn on or off the TV. |
| |||
|
|
|
|
TV/VIDEO | Set the input mode (either | ||
|
|
| TV or VIDEO). |
1 - 9, 0, or +100 while | Selects the channels. | ||
pressing SHIFT |
| ||
RETURN while pressing | Alternates between the | ||
SHIFT | previously selected channel | ||
|
|
| and the current channel. |
TV CH +/– while pressing | Change the channels. | ||
SHIFT |
| ||
TV VOLUME +/– while | Adjust the volume. | ||
pressing SHIFT |
| ||
|
|
|
|
NOTE
•The operating buttons may differ depending on manufacturers.
14