Operations for USB MEMORY
See page 21 for button locations.
Basic playback for USB MEMORY
7 To play a file in a USB mass storage class device1 Connect a USB mass 
storage class device (see page 13) while the system is turned off.
2 Turn on the system. (See page 16.)
3 Select “USB MEMORY” as the source. (See page 16.)
4 Start playback.
On the remote control:
Press USB MEMORY 6.
On the center unit:
Press iPod/USB MEMORY
CONTROL ‹/8.
The operations of the files in a USB mass storage class device depend on the file types stored in the device.
For MP3/WMA/WAV files
The file control display (see page 24) appears on the TV screen.
For JPEG files
Each file (still pictures) is shown on the TV screen for about 3 seconds
Pressing TOP MENU or MENU shows the file control display (see page 24) on the TV screen during playback.
Example: When an MP3 file is played back
Signal and speaker indicators (see page 28)
File number
Group number
Elapsed playing time (hour:minute:second) (during playback only)*
*Each time you press DISPLAY, the elapsed playing time and the file information appears alternately.
JPEG fileFile number
Group number
NOTE
•When several types of files are recorded on a device, select file type you want to play on the setup menu (see page 30).
7To stopPress 7.
7To pauseOn the remote control:
Press USB MEMORY 6 during playback.
On the center unit:
Press iPod/USB MEMORY CONTROL ‹/8 during playback.
To continue playback, press the button again.
File type
NOTE
•You can also check the playback information using the on- screen bar. (See page 24.)
•When playback is stopped, the file type is shown on the display window instead of elapsed playing time.
7Screen saverAn image may burn in on a TV screen if a static picture is displayed for a long time. To prevent this, the system automatically dims the screen if a static picture is displayed for over 5 minutes (the screen saver function).
•Pressing any button will cancel the screen saver function.
•If you do not want to use the screen saver function, see page 29.
22