Basic operations

See page 16 for button locations.

Adjusting the output level of the speakers and subwoofer1 Press SPK LEVEL to show the target speaker indication on the display window.

Each time you press the button, the indication of the speakers changes as follows:

FRNT L (Front left speaker) Z FRNT R (Front right speaker) Z CENTER (Center speaker) Z SURR L (Surround left speaker) Z SURR R (Surround right speaker) Z SUBWFR (Subwoofer) Z (back to the beginning)

2 Press +/– to adjust the output level from –6 to +6 while speaker indication is displayed.

NOTE

•You can also make adjustments by using the setup menu shown on the TV screen. (See page 30.)

•The adjustments take effect for all sources.

Changing the scanning mode

The system can be accommodated to your TV’s scanning mode when playing back a JPEG/ MPEG-1/MPEG-2/ASF file in the USB mass storage class device.

NOTE

•To use the system in the progressive mode, it is required that the center unit is connected to the TV by using component video cord (not supplied). (See page 9.)

7While USB MEMORY playback is stopped

1 Press and hold SCAN MODE for 2 seconds.

The current setting appears on the display window.

2 Press 2/3 to select the desired mode.

•PAL: Select when your TV supports the PAL interlaced video input only.

•PAL PRG: Select when your TV equipped with component jacks supports the PAL progressive video input.

•NTSC: Select when your TV supports the NTSC interlaced video input only.

•NTSC PRG: Select when your TV equipped with component jacks supports the NTSC progressive video input.

You can get better picture quality in PAL PRG, NTSC PRG mode than in PAL, NTSC mode.

3 Press ENTER while the selected mode is displayed.

When “PAL PRG” or “NTSC PRG” is selected, the PROGRESSIVE indicator lights on the display window.

NOTE

•Although the picture may be distorted when you press ENTER, this is not a malfunction of the system.

•There are some progressive TVs and High- Definition TVs that are not fully compatible with this system, resulting in an unnatural picture when playing back a JPEG/MPEG-1/MPEG-2/ASF file in the progressive scanning mode. In such a case, change the scanning mode to “PAL” or “NTSC.”

•All JVC progressive TVs and High-Definition TVs are fully compatible with this system.

18