Setting preferences

See page 29 for button locations.

: Other setting menu (OTHERS)

7RESUME (See page 25.)

You can activate or deactivate Resume Playback function.

7ON SCREEN GUIDE

You can activate or deactivate the on-screen guide icons. (See page 23.)

Setting the audio terminal

You can set the analog or digital audio input terminal to use with the source of VIDEO 1-3.

NOTE

•Before you start the operation;

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

1 Select “VIDEO 1”, “VIDEO 2” or “VIDEO 3” as the source.

(See page 16.)

2 Press SETTING.

Example:

3 Press 5/Y to select the source you want to set.

•V1 A/D: For the source of VIDEO 1

•V2 A/D: For the source of VIDEO 2

•V3 A/D: For the source of VIDEO 3

4 Press 2/3 to select the audio input terminal you want to use for the source selected in the above step.

Example:

•ANALOG: Signal from AUDIO jacks comes out of the speakers (see pages 10 to 12).

•DIGITAL: Signal from DIGITAL IN terminal comes out of the speakers (see pages 10 to 12).

NOTE

•If you press DVD 3 or DVD 8 in the middle of the procedure, you cannot select ANALOG/DIGITAL by pressing 2/3. In this case, press the button for the current source (VIDEO1, VIDEO2 or VIDEO3) then press 2/3 to select ANALOG/DIGITAL.

31