JVC TK-C676 manual Attach the cover

Models: TK-C676

1 48
Download 48 pages 62.15 Kb
Page 17
Image 17

Coaxial cable

Connecting a RG-59coaxial cable.

If a RG-11coaxial cable is used it cannot be con- nected directly to the terminal board. To use such a cable, connect a RG-59cable to the camera and then connect the RG-11cable to the RG-59cable.

Treat the extremity of the coaxial cable as shown below before connecting it.

Fold back the mesh wires and secure them with insulation tape in order to prevent them from becoming loose and thus causing a short circuit.

Polyethylene

Mesh wires

Conductor

wire

Alarm signal cables P. 8

Alarm output terminals (CN24) Connect the provided 4P Alarm cable to these terminals.

Alarm input/output terminals (CN23)

Alarm input terminals (CN26) Connect the provided 6P Alarm cable to these terminals.

Electrical Specification of the Alarm Output Terminals

7

17

(5)

(12)

 

Insulation tape

The figures inside the brackets ( ) are the dimensions

when the coaxial cable is distributed from the side of the cover. (Unit : mm)

If the cable is extended, the signal attenuation is increased, the resolution drops and the noise increases. Should it be required to extend the cable, use a thicker cable or a ca- ble length compensator.

To lead the coaxial cable through the cap on the side of the cover, change the positioning of the cable plate as shown below.

 

Provided screw

 

Screw removed in the

Provided cable

figure on the left

plate

 

N. OPEN

COM.

N. CLOSE

ALARM2+ or ALARM3+

22

ALARM2– or ALARM3–

The ALARM 1 terminal outputs a contact signal. In the alarm status, the section between N.OPEN and COM is shorted (makes an electri- cal contact) and the section be- tween N.CLOSE and COM is opened (breaks contact).

Rating

Maximum applied voltage: 30 V DC or 24 V AC

Maximum applied current: 2 A

Contact life: 200,000 times of operation

The ALARM 2 and ALARM 3 ter- minals output open-collector sig- nals insulated by photocouplers.

The terminal is ON in the alarm status. As these terminals are provided with polarity, make sure that the voltage at the + terminal is higher than that at the – terminal.

Do not apply inverse voltage to pre- vent damage of these terminals.

Control signal cables

RM-P2580 units allow the connection of up to eight cam- eras to a single set of control signal cables. The overall maximum permissible length of these control signal cables is 1200 meters.

Cable

Flat-blade

screwdriver

The connector can be released by

loosening the screws on the two sides as shown in the figure.

Flat-blade screwdriver

Strip the coating of each cable by about 4

mmbefore inserting it. After connecting all of the cables, turn the screws on the side to fasten the connectors.

It is recommended to use a 4-core (a pair) twisted pair cable (0.65) or a twisted pair cable of category 3 or higher which is used for a Ethernet.

Cables with a thickness between 16 AWG and 26 AWG can be used. Connect the control signal cables so that the TX+ and TX- signals form a pair and the RX+ and RX- signals form another pair.

Rating

Maximum applied voltage: 20 V DC

Maximum drive current: 25 mA

Electrical Specifications of Alarm Input Terminals

ALARM1

 

 

 

• To prevent penetration of noise in the

 

GND

 

internal circuitry, apply a non-voltage

 

 

 

 

 

 

 

 

 

contact signal to the ALARM input

 

 

 

 

 

 

terminal. Never apply a voltage.

Use the appropriate menu to select whether the alarm is identified by shorting (making contact) or by opening (break- ing contact).

Apply an alarm signal for at least 200 ms. If it is shorter, it is not guaranteed that the signal will be recognized as an alarm signal.

5.Attach the cover.

Attach the cover to the ceiling mount by reversing the operations in step 2.

CAUTION

In order to prevent foreign objects from entering inside the ceiling mount be sure to attach the hemispherical cover correctly. The penetration of foreign objects into the ceiling mount may cause a malfunction and smoking or in the worst case a fire ignition.

17

Page 17
Image 17
JVC TK-C676 manual Attach the cover

TK-C676 specifications

The JVC TK-C676 is a professional-grade CCTV camera renowned for its impressive image quality and reliable performance in various surveillance applications. As part of JVC's reputable line of security products, the TK-C676 incorporates advanced technologies that make it a popular choice among security professionals and businesses alike.

One of the standout features of the TK-C676 is its high-resolution imaging capability. With a 1/3-inch CCD sensor, this camera delivers crisp and clear images, ensuring optimal visibility even in challenging lighting conditions. The camera offers a resolution of 540 TV lines, which allows for detailed surveillance footage that can be crucial for identifying individuals or activities in monitored areas.

Another notable characteristic of the TK-C676 is its robust low-light performance. Thanks to its sense-up technology, the camera can automatically adjust its sensitivity in low-light environments, providing better image quality without the need for external lighting. This feature is particularly valuable for nighttime surveillance or in dimly lit indoor settings, enhancing the overall effectiveness of security measures.

The TK-C676 also excels in flexibility and adaptability with its mechanical IR cut filter. This technology allows for seamless switching between day and night modes, ensuring consistent image quality during both daytime and nighttime operation. This adaptability makes the camera suitable for various applications, including retail stores, parking lots, and public spaces.

Additionally, the JVC TK-C676 features a varifocal lens with a focal length of 3.5mm to 8mm, providing users with the ability to adjust the field of view based on specific surveillance needs. This versatility enables the camera to cover wide areas or focus on particular subjects, making it ideal for both indoor and outdoor placements.

In terms of durability, the TK-C676 is built to withstand harsh environmental conditions. With a sturdy housing that resists both water and dust, this camera can be installed in various locations without compromising on performance. This reliability is essential for continuous operation in demanding environments.

Overall, the JVC TK-C676 is a well-rounded CCTV camera that offers high-resolution imaging, excellent low-light performance, and adaptable features. Its combination of advanced technology, durable construction, and flexible camera options makes it a strong choice for anyone seeking a reliable surveillance solution. Whether for commercial, industrial, or residential applications, the TK-C676 proves to be a valuable asset in enhancing security measures.