JVC TK-C676 manual Factory Settings screen

POSITION FUNCTION SET Screen (Continued)

This screen sets the configurations of functions relating to pictures taken in preset positions.

Item	Function & Setting	Initial Value
W. BALANCE	Determines the setting of the white balance adjustment. The white balance can be	ATW
	adjusted for lighting conditions with color temperatures from 2500K to 8000K.
	ATW : Auto-Tracking White balance mode, adjusts the white balance automati-
	cally according to the color temperature of the lighting conditions.
	When ATW is set, “---“ is displayed for the items “R-B GAIN” and “M-G
	GAIN”, so that the color phase adjustment cannot be carried out.
	AWC : Auto White Control mode, which displays “PUSH SET → ADJ. STRAT”.
	When the SET button is pressed, AWC is activated and thet white balance
	adjustment starts.
	If the AWC is activated while the screen is B&W the LOW LIGHT ERROR
	will be displayed. This is not abnormal.
R-B GAIN	Adjusts the phases of R (Red) and B (Blue) under AWC mode.	95
	• To enhance blue: Decrease the value.
	• To enhance red : Increase the value.
	Setting values : 0 to 255
M-G GAIN	Adjusts the phases of M (Magenta) and G (Green) under AWC mode.	63
	• To enhance green : Decrease the value.
	• To enhance magenta : Increase the value.
	Setting values : 0 to 255

FACTORY SETTINGS screen

This screen resets values to their factory settings.

Item		Function & Setting	Initial Value
FACTORY	Resets all settings in the above menus to their initial factory settings. Pressing the		–
SETTINGS	SET button displays “EXECUTING” (about 15 seconds) and resets the settings to
	the factory settings.
	CANCEL	: Does not alter current values.
	CLEAR (W/O POS. TITLE) : Resets the settings to the initial, factory settings.
		However, the set positions, the setting data of each
		position and the titles are not reset to the factory set-
	CLEAR (ALL)	tings.
		: Resets all settings including titles and stored positions.

31