JVC TK-C676 manual Home Motion Detect Setup, Move the cursor to Area Edit and press the SET button

Setting Up the Camera Using an RM-P2580

HOME MOTION DETECT Setup

Use the HOME MOTION DETECT screen to set the areas to be excluded from the target area of the motion detect function. (which outputs an alarm upon detection motion in the monitored picture)

MENU button

SET button

			REMOTE CONTROL UNIT RM-P2580
SETUP		CAMERA	POSITION
		POWER
MENU	SET	ALARM	AUTO	F-1	F-2	F-3

KEY LOCK

1. Select the camera. ( ☞ RM-P2580 Instruction manual)

CAMERA button → Numeric key (camera number) → ENTER button. The picture of the selected camera is output.

	LENS			CAMERA/POSITION			PAN/TILT
	SPEED		1	2	3	CAMERA	POSI-
							TION
	IRIS		4	5	6	1	2
CLOSE		OPEN				OPTION	OPTION
NEAR	FOCUS	FAR	7	8	9	AUTO	AUTO
	AF					PAN	PATROL
WIDE	ZOOM	TELE	CLEAR	0	ENTER
				/HOME

ENTER button

– – – M E N U – – –

C A M . F U N C T I O N 1 . .

C A M . F U N C T I O N 2 . .

C A M . T I T L E / A L A R M . .

C A M . V I D E O A D J U S T . . C A M . A L C . .

H O M E M O T I O N D E T E C T . .

A U T O P A N / P A T R O L / T R A C E . . P O S I . F U N C T I O N S E T . .

F A C T O R Y S E T T I N G S . .

Numeric keys

CAMERA buttons

PAN/TILT lever

2. Display the SETUP menu on the camera.

( ☞ P. 20, steps 1 to 4 )

MENU button (3 sec.) → Select “CAMERA” with the PAN/TILT lever

→ SET button.

3.Tilt the PAN/TILT lever up or down to move the cur- sor (>) to “HOME POSITION DETECT” and press the SET button.

The HOME POSITION DETECT menu is displayed.

The camera moves to the home position.

4. Move the cursor (>) to “AREA EDIT” and press the SET button.

The AREA EDIT setting screen is displayed. (The frame display position is moved slightly upward from the center of the screen.)

SETUP menu display on the camera

– – – H O M E M O T I O N D E T E C T – – –

M O D E		O F F
L E V E L		– – –
A R E A	E D I T . .
A L A R M D I S P L A Y		5 s
D E M O N S T R A T I O N . .

HOME MOTION DETECT menu

Blinking

AREA EDIT screen

– – – D E M O N S T R A T I O N – – –

5. Use the PAN/TILT lever to select the area to be ex- cluded from the motion detection target area.

The area blinking in white is moved by the operation of the lever.

6. Press the SET button.

•The area to be excluded is set and blinks in gray.

•To cancel, press the SET button again.

•When the setting is canceled, the gray blinking changes to white blinking.

7.Repeat steps 5 and 6 for each area to be excluded from the motion detection target area.

Complete the setup of all excluded areas in this way.

8. Press the MENU button.

The screen returns to the previous menu.

MEMO

The positions of areas in the picture are reference positions. Check the actu- al positions in the actual picture.

The areas set to be excluded from the motion detection target area can be confirmed in the DEMONSTRATION screen.

The motion detect function is not intended to prevent fire or theft. There- fore, JVC will not assume any liabilities for accidents and damage relat- ed to the use of this function.

DEMONSTRATION screen

36