JVC TK-C676 manual Private Mask Setup

Setting Up the Camera Using an RM-P2580

PRIVATE MASK Setup

Use the PRIVATE MASK screen to set up the private mask function, which grays out areas that are not required to be included in the monitored picture. Up to four private masks can be set per screen, and up to eight private masks can be set in total.

MENU button

SET button

			REMOTE CONTROL UNIT RM-P2580
SETUP		CAMERA	POSITION
		POWER
MENU	SET	ALARM	AUTO	F-1	F-2	F-3

KEY LOCK

Numeric keys

	LENS			CAMERA/POSITION				PAN/TILT	CAMERA
	SPEED		1	2	3	CAMERA	POSI-		buttons
							TION
	IRIS		4	5	6	1	2
CLOSE		OPEN				OPTION	OPTION		PAN/TILT
NEAR	FOCUS	FAR	7	8	9	AUTO	AUTO
	AF					PAN	PATROL		lever
WIDE	ZOOM	TELE	CLEAR	0	ENTER
				/HOME

1. Select the camera. ( ☞ RM-P2580 Instruction manual)

CAMERA button → Numeric key (camera number) → ENTER button. The picture of the selected camera is output.

2. Select the angle of view.

Use the PAN/TILT lever and the lens button to set the viewing angle to which the private mask function is to be applied.

3. Display the SETUP menu on the camera. ( ☞ P. 20, steps 1 to 4 )

MENU button (3 sec.) → Select “CAMERA” using the PAN/TILT lever → SET button.

TELE ENTER button button

WIDE button

– – – C A M E R A F U N C T I O N 1 – – –

V . P H A S E		0
P O S . T I T L E L O C .		U P - L
F L I P		D I G I T A L
V A R . P / T S P E E D		O N
E A S Y	A F	O F F
D . Z O O M M A X		X 2
V . S H A R P N E S S		N O R M A L
T I L T L I M I T		5 °
P R I V A T E M A S K . .
– – – P R I V A T E M A S K – – –
M O D E		O N
M A S K	N O	1	*
M A S K	E D I T . .

M A S K D E L E T E . .

Already set.

4. Tilt the PAN/TILT lever up or down to move the cursor (>) to “CAMERA FUNCTION1” and press the SET button.

The CAMERA FUNCTION1 menu is displayed.

5. Move the cursor (>) to “PRIVATE MASK” and press the SET button.

The PRIVATE MASK submenu is displayed.

6. Select the private mask function ON or OFF.

Turn the private mask function on or off by setting the “MODE” item in the submenu to ON or OFF (Factory setting: OFF)

7. Select the mask number.

Select the private mask number from MASK NO. 1 to 8 and move the cursor on to the item “MASK EDIT.” Of these, a maximum of 4 can be set within one picture.

If an already set mask number is selected, the (*) mark will be displayed.

8. Edit the masking area.

•Move the cursor to “MASK EDIT” and press the SET button to display the MASK EDIT screen. (The masked area will be dis- played as a grayed-out area.)

•Tilt the PAN/TILT lever to move the grayed-out area to the center of the area to be masked.

•Press the TELE and WIDE buttons to set the masked area size.

– – – M A S K E D I T – – –

P U S H M E N U →￿￿ S A V E & R E T U R N

– – – M A S K D E L E T E – – –

C A N C E L

D E L E T E

CAUTIONS

CAUTIONS

●It is not possible to set five or more masks in adjacent areas. (Even when this is attempted, the masked area that is required to be set will not be displayed.)

●MASK cannot be set at lower than approx. 45° in the horizontal direction. (The masks for new settings are not displayed.)

9.Press the MENU button.

•The screen returns to the “PRIVATE MASK menu”.

•To delete a private masked area, select “MASK DELETE”, move the cursor to “DELETE” and press the SET button.

The PRIVATE MASK menu reappears after the data has been deleted.

To cancel deletion, select “CANCEL” and press the SET button.

10.Repeat steps 7 to 9 for each additional masked area.

11.Press the MENU button.

The screen returns to the “CAMERA FUNCTION1” menu.

●There may be cases, depending on the camera direction and zoom position in which an object is captured from within the private mask area. After setting the private mask, be sure to vary the camera direction and zoom position in order to confirm that the camera does not capture objects from within this area.

●The private MASK function cannot be carried out during the initializing process immediately after the power is turned on.

●If a high value is set in item “SENSE UP”, the masked object may be displayed depending on the camera orientation even when the object is located within the private masking area. (TK-C676 only)

●If the picture being shot contains 5 or more masks, the entire picture is masked.

32