9
DISPLAY AND SELECTIONS IN THE <SET-UPMENU> MODE (SETTING)
You can set the following set-up menu items.
• H. POSITION • CONTROL LOCK • INPUT REMOTE
• WHITE BALANCE • STATUS DISPLAY • ASPECT REMOTE

1. While pressing the MENU button, press the

CHROMA/PHASE button.

The <SET-UP MENU> screen is displayed.

2. Press the CHROMA/PHASE or CONTRAST/BRIGHT

button to select the desired menu item.

A selection mark (
3
) is put next to the selected item.

3. Press the VOLUME/SELECT buttons to set.

÷ To adjust the white balance, select WHITE BALANCE and
press the VOLUME/SELECT (+) or (–) button to display the
CUT OFF or DRIVE setting screen, then adjust each setting.
÷ Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
Notes:
<Front panel buttons>
1 Selection mark (
3
): Indicates the
menu item you select.
2 Menu item: Menu items you can
select.
3 Setting display: Indicates the
current settings (value).
4 Function display: The functions of
the front panel buttons (5 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
∞Forward the menu item.
5Reverse the menu item.
–Lower the adjustment
value. (to the minimum)
+ Raise the adjustment
value. (to the maximum)
3
Forward the setting value.
2
Reverse the setting value.
EXIT Exit the <SET-UP MENU>
screen. (release)
DRV Selects DRIVE adjustment.
CUTO Selects CUT OFF
adjustment.
R·BAdjusts red and blue
signal level.
RGB Adjusts red, green and
blue signal level.
Turns the ON-SCREEN
display on or off. (This
DISP function is effective only
in the DRIVE or CUT OFF
adjustment mode.)
Front panel Function Contents
button displayed
CHROMA/ ∞Forward selection mark (
3
)
PHASE
CONTRAST/ 5Reverse selection mark (
2
)
BRIGHT
Front panel Function Contents
button displayed
+ Increase (to max. value)
3
Forward the setting value
CUTO Selects CUT OFF setting screen
–Decrease (to min. value)
2
Reverse the setting value
DRV Selects DRIVE setting screen
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
÷ Parameter for H. POSITION can be set separately depending on the video input
(Input A (VIDEO) or Input B (VIDEO)) selected by the input select buttons on the front
panel.
Select the required video input with the input select buttons on the front panel in
advance.
÷ WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature
value. Set COLOR TEMP. to 6500 or 9300 on the <MENU> screen beforehand.
Notes:
<SET-UP MENU> screen

PHASE

MENU

CHROMA

ENGLISH
EN_TM_A210GE.p65 03.3.12, 7:11 PM9