English

To connect AM and FM antennas

2

FM antenna

Adjusting the Voltage Selector

Before plugging in the unit, set the correct voltage for your area with the voltage selector on the bottom of the unit.

FM

ANTENNA

AM

LOOP

1

VOLTAGE

SELECTOR

AC 220 -

AM loop antenna (supplied)

1Connect the supplied AM loop antenna to the

AM LOOP terminal.

Place the antenna away from the unit and adjust its position for the best reception.

AC 110 - 127V

Use a screwdriver to move the voltage selector so the voltage number is the same as the voltage where you are plugging in the unit. (See the back cover page.)

DO NOT plug in before setting the voltage

selector on the bottom of the unit and all connection procedures are complete.

DO NOT drag the unit when moving it. Dragging may possibly change the voltage selector setting accidentally.

2Adjust the position for the FM antenna for the best reception.

For better reception of both FM and AM

Make sure the antenna conductors do not touch any other terminals or connecting cords.

Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

NOW you are ready to plug in the unit.

If the wall outlet does not match the AC plug, use the supplied AC plug adaptor.

IMPORTANT:

Be sure to check that all connections have been made before plugging in the power cord.

7