JVC UX-H10 Using the Sleep Timer, How the Sleep Timer actually works, 1 Press SLEEP, Press TIMER SET, daily timer mode, On the remote control ONLY:, To cancel the setting

JVC UX-H10 Using the Sleep Timer, How the Sleep Timer actually works, 1 Press SLEEP, Press TIMER SET, daily timer mode, On the remote control ONLY:, To cancel the setting

English

7	Press TIMER SET.	TIMER SET
		TIMER SET
	The display changes normal indication and exit


	the timer setting mode.

8	Press TIMER ON/OFF to activate the ON/OFF
			TIMER

daily timer mode.

Each time you press the button, the Daily Timer alternates on and off.

While activating the Daily Timer, the (timer) indicator lights up on the display.

•You can active the Daily Timer by pressing TIMER ON/OFF on the unit.

9 Press STANDBY/ON to turn off the unit if the unit is on.

To deactivate the timer temporarily, press	TIMER
TIMER ON/OFF until the (timer) indicator	ON/OFF
TIMER ON/OFF until the (timer) indicator
goes off.

To activate and change the timer, repeat steps 1 to 8 on pages 18 and 19.

• To activate the timer again without changing the setting, press TIMER ON/OFF until the (timer) indicator lights up on the display.

If the unit is already turned on when the timer on-time comes

The timer does not works.

When you unplug the AC power cord or if a power failure occurs

The timer will be canceled. You need to set the clock first, then set the timer again.

Using the Sleep Timer

With the Sleep Timer, you can fall asleep to your favorite music or radio program.

•You can set the Sleep Timer only when the unit is turned on.

How the Sleep Timer actually works

The unit automatically turns off after the specified length of time passes.

On the remote control ONLY:

1 Press SLEEP.

SLEEP

The SLEEP indicator lights up on the display.

•Each time you press the button, the length of time changes as follows:

90 80 70 60 50

OFF 10 20 30 40

2 Wait for about 5 seconds after specifying the length of time.

To check the remaining time until shut-off time, press SLEEP once. The remaining time until shut-off time appeears for about 5 seconds.

To change the shut-off time, press SLEEP repeatedly until the length of time you want appears.

To cancel the setting, press SLEEP repeatedly until “OFF” appears and the SLEEP indicator goes off on the display.

• Turning off the unit also cancels the Sleep Timer.

When you set the Sleep Timer after the Daily Timer starts playing the selected source

The unit turns off with either timer having an earlier shut-off time.

If you set the Sleep Timer while playing back or recording a tape

Do not shut the unit off with the Sleep Timer while a tape is running. If the unit turns off while playing back or recording a tape, the cassette deck or tapes may be damaged.