English
Troubleshooting
If you are having a problem with your unit, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.
Symptom
Power does not come on.
No sound is heard.
| Possible Cause |
|
| Action |
The power cord is not connected to an |
| Insert the plug into the socket. | ||
AC outlet. |
|
|
| |
|
|
|
|
|
• | Connections are incorrect or loose. |
| • | Check all connections and make |
|
|
|
| corrections. (See pages 6 and 7.) |
• | A pair of headphones is connected. |
| • | Unplug the headphones from the |
|
|
|
| PHONES jack. |
|
|
|
|
|
Hard to listen to broadcasts because of noise.
The disc does not play.
Impossible to record.
•Antennas are disconnected.
•The AM loop antenna is too close to the unit.
•The FM antenna is not properly extended and positioned.
The disc is upside down.
Small tabs on the back of the cassette are removed.
•Reconnect the antenna correctly and securely.
•Change the position and direction of the AM loop antenna.
•Extend FM antenna and orient to the best reception position.
Put the disc in with the label side up.
Cover the holes with adhesive tape.
Operations are disabled.
Unable to operate the unit by the remote control.
The |
| Unplug the AC power cord then plug it | ||
malfunctioned due to external electrical |
| back in. | ||
interference. |
|
|
| |
|
|
|
|
|
• | The path between the remote control |
| • | Remove the obstruction. |
| and the remote sensor on the unit is |
|
|
|
| blocked. |
|
|
|
• | The batteries are exhausted. |
| • | Replace the batteries. (See page 6.) |
• | You are using the remote control too |
| • | Signals cannot reach the remote |
| far from the unit. |
|
| sensor. Move closer to the unit. |
|
|
|
|
|
21