English
Presetting Stations
You can preset 20 FM and 20 AM stations manually.
In some cases, test frequencies have been already stored for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 2.
On the remote control ONLY:
1 Tune in to the station you want to preset.
Tuning in to a Preset Station
On the remote control ONLY:
1 Press TUNER/BAND to select either TUNER
/BAND
“FM” or “AM.”
The unit automatically turns on and tunes in to the previously received
•Each time you press the button, the band alternates between FM and AM.
2 Press 
or 
to select a preset number.
• See “Tuning in to a Station” on page 10.
2 Press PROGRAM.
The PROG (program) indicator and “00” start flashing on the display.
3 Press 
or 
to select a preset number.
4 Press PROGRAM again.
The PROG indicator and the selected preset number stop flashing.
PROGRAM
PROGRAM
5 To preset more stations, repeat steps 1 to 4 above, allocating a different preset number to each station.
•Storing a new station on an already assigned number erases the previously stored one.
When you unplug the AC power cord or if a power failure occurs
The preset stations will remain in the unit.
11