JVC UX-P450 manual Timer Operations

Timer Operations

English

Remote control

	STANDBY/ON
	CLOCK/
SET	TIMER
,
	CANCEL

*Daily Timer initial settings when shipped from the factory

•DAILY 1:ON Time (6:00)/OFF Time (8:00)/ Source (TUNER FM 1)/Volume level (– –)

•DAILY 2:ON Time (12:00)/OFF Time (14:00)/ Source (TUNER FM 1)/Volume level (– –)

•DAILY 3:ON Time (18:00)/OFF Time (20:00)/ Source (TUNER FM 1)/Volume level (– –)

Setting the Timer	Remote
	ONLY

Using Daily Timer, you can wake up with your favorite song. On the other hand, with Recording Timer, you can make a tape of a radio broadcast automatically.

•You can store three Daily Timer settings and one Recording Timer setting; however, you can activate only one of Daily Timers and Recording Timer at the same time.

•To exit from the timer setting, press CLOCK/TIMER as required.

•To correct a misentry during the process, press CANCEL. You can return to the previous step.

1 Select one of the timer setting modes you want to set— Daily 1 ON time, Daily 2 ON time, Daily 3 ON time, or Recording Timer ON time.

CLOCK/		Daily 1 Timer			Daily 2 Timer		Daily 3 Timer
TIMER		DAILY 1*	ON (Time)	DAILY 2*		ON (Time)	DAILY 3*	ON (Time)
		Canceled			Clock setting		ON (Time)		REC TMR
					(see page 17)		Recording Timer
	1

Ex. When Daily Timer 1 setting mode is selected

2 Make the timer setting as you want.

Repeat the following operations until you finish setting in the following order—

SET

For Daily Timers:

1Set the hour then the minute for on-time.

2 Set the hour then the minute for off-time.

3 Select the playback source—“TUNER FM,” “TUNER AM,” “TAPE,” “DISC,” or “AUX.”

1

4For “TUNER FM” and “TUNER AM”: Select a preset channel.

For “DISC”: Select the title/group number, then the chapter/track number.

31