JVC UX-P450 Listening to the Radio, English, To set the AM tuner interval spacing ONLY, Fm Am

Listening to the Radio

Main Unit

To set the AM tuner interval spacing ONLY

Before operating the tuner, it is required to select the appropriate AM space interval used for your area.

1Select the AM band.

FM AM

2Turn off the power.

STANDBY/ON

To tune in to a station

While FM or AM is selected...

Remote control:		Main unit:
	2 sec.
				2 sec.
	GROUP/TITLE		DOWN		UP

Frequency starts changing on the display.

When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.

•When you repeatedly press the button, the frequency changes step by step.

To stop searching manually, press either button.

English

3Select the appropriate AM space interval for your area.

•You can only use the button and the control on the front panel.

STANDBY/ON

If the received FM station is hard to listen

FM MODE

9

(at the same time)

Remote

ONLY

DOWN

AM 9KHZ

(9 kHz interval)

While holding...

STANDBY/ON

UP

AM 10KHZ

(10 kHz interval)

While holding...

To select the band (FM or AM)

FM AM

The MONO indicator lights on the display. Reception will improve though stereo effect is lost—Monaural reception mode.

To restore the stereo effect, press the button again (the

MONO indicator goes off).

To preset the stations	Remote
	ONLY

You can preset 30 FM and 15 AM stations.

1Tune in to a station you want to preset.

•You can also store the monaural reception mode for FM preset stations if selected.

2Activate the preset number entry mode.

SET

•Finish the following process while the indication on the display is flashing.

11