JVC UX-P450 manual To turn off the unit after playback is over-Auto Standby

3 Adjust the parameter.	Turning Off the Power
ENTER	Automatically	Remote
		ONLY

To turn off the unit after playback is over—Auto

Standby

4Repeat steps 2 to 3 to adjust other parameters.

To erase the screen, press VFP again while holding SHIFT.

Setting the Clock	Remote
	ONLY

Without setting the built-in clock, you cannot use Daily Timers, Recording Timer (see page 31) and Sleep Timer.

•To correct a misentry during the process, press CANCEL or CLOCK/TIMER. You can return to the previous step.

1Activate the clock setting mode.

CLOCK/

TIMER

SLEEP	On
A.STANDBY

Canceled

(at the same time)

When Auto Standby is in use, the A.STANDBY indicator lights on the display.

When disc play stops, the A.STANDBY indicator starts flashing. If no operation is done for about 3 minutes while the indicator is flashing, the System turns off (stands by) automatically.

•Auto Standby does not work while you are listening to radio (FM/AM) and the external component (AUX).

•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected.

2Adjust the hour.

SET

3Adjust the minute.

SET

Now the built-in clock starts working.

To check the current clock time during play

DISPLAY Clock

Source information

•While playing a DVD and MP3/WMA, you cannot check the current clock time (see page 9) .

To turn off the unit after a certain period of time —Sleep Timer

1Specify the time (in minutes).

SLEEP	10	20	30	60	90	120	150
A.STANDBY

Canceled

2Wait until the set time goes off.

To check the time remaining until the shut-off time

SLEEPSLEEP

A.STANDBY

•If you press the button repeatedly, you can change the shut- off time.

17