Switching to a program type of your choice temporarily –––––––––––––––––––
EON (Enhanced Other Networks) is another convenient RDS service that allows this Unit to switch temporarily to a broadcast program of your choice (NEWS, TA or INFO) from the currently selected station, except if you are listening to a
•The EON indicator lights up when tuned to a station which provides EON information.
•If an FM station does not broadcast EON information, EON
cannot be activated. | UP |
| DOWN |
PTY/EON | PTY/EON |
(On the Remote Control) | |
| or |
DOWN | UP |
(On the Unit)
1Press the PTY/EON button on the Remote Control twice while listening to an FM station.
The display alternates between “EON” and “SELECT.”
2Select the program type with the 4 or ¢ button on the Unit (or the UP or
DOWN button on the Remote Control) within 10 seconds.
The display shows a program type in the following order:
TA: Traffic Announcement
NEWS: News
INFO: Programs on medical service, weather forecast, etc.
OFF: Canceled
3Press the PTY/EON button on the Remote Control again within 10 seconds to set the selected program type.
The selected program type indicator lights up on the display, and the Unit enters EON Standby mode.
Case 1: If there is no station broadcasting the program type you have selected
The broadcast station being currently heard will continue to be heard.
›
When a station starts broadcasting the program you have selected, this Unit automatically switches to the station. The program type (TA, NEWS or INFO) indicator starts flashing.
›
When the program is over, this Unit goes back to the currently selected station, but still remains in EON Standby mode.
Case 2: If there is a station broadcasting the program type you have selected
This Unit tunes to the station broadcasting the program. The program type (TA, NEWS or INFO) indicator starts flashing.
›
When the program is over, this Unit goes back to the currently selected station, but still remains in EON Standby mode.
Case 3: If the FM station you are listening to is broad- casting the program type you have selected
The broadcast station being currently heard will continue to be heard. The program type (TA, NEWS or INFO) indicator starts flashing.
›
When the program is over, this Unit goes back to the currently selected station, but still remains in EON Standby mode.
Notes:
•If the EON is in standby mode and the source (CD, TAPE, AUX) is changed or the power is switched off, then the EON mode will be released. When the band is set to AM (MW/LW), the EON is not activated. When the band is set to FM again, the EON will be set to standby mode.
•When the EON is being operated (i.e. the selected program type is being received from the broadcast station) and if the DISPLAY MODE or 4, ¢ button (or the </>/DOWN/UP button on the Remote Control) is operated, the station will not switch back to the current selected station even after the program ends. The program type indicator remains in the display, indicating that the EON is in standby mode.
•When the EON is in standby mode and a radio broadcast is being recorded, be careful because the EON may be activated and a different program than the intended one may be recorded. When the EON mode is not required, release the EON mode.
•When the alarm signal is detected by EON, the station broadcasting the alarm is received with priority. “ALARM” is not displayed.
CAUTION:
When the sound alternated intermittently be- tween the station tuned in by the EON function and the current selected station, cancel the EON mode. This does not constitute malfunction of the Unit.
English
11
