|
| Basic Operations |
|
|
|
Changing the Color (COLOR) |
| Tone Control (BASS/TREBLE) |
|
|
|
(Using the Remote Control) |
| (Using the Remote Control) |
You can change the color of the illumination on the Unit. |
| You can control the tone by changing the bass and treble. |
|
|
English
1 Press the % button to turn on the Sys- tem.
BASS Control
You can adjust the bass level (low frequency range level) between
2 Press the COLOR button on the Remote Control.
1 Press the BASS button
BASS
“RANDOM COLOR” is displayed.
3 Press the 
or 
button to select the setting of your choice.
The color changes as follows:
|
|
|
|
|
|
|
|
|
|
|
|
|
| (Blue) (Red) | |||||
|
|
|
|
|
|
|
|
|
|
RANDOM COLOR: | The color changes randomly. | ||||||||
B R: | The color between blue and | ||||||||
on the Remote Control.
SET
2 Press the 
or 
button on the Remote Control to adjust the bass level.
TREBLE Control
You can adjust the treble level (high frequency range level) between
(Blue) (Red) | red is selectable in 16 steps |
| using the > or < button. |
1 Press the TREBLE button on the Remote Control.
TREBLE
GRADATION: | The color changes gradually |
| between blue and red. |
Adjusting the Volume
To increase the volume, press the VOLUME + button on the Remote Control (or VOL + button on the Unit).
To decrease the volume, press the VOLUME – button on the Remote Control (or VOL – button on the Unit).
SET
2 Press the 
or 
button on the Remote Control to adjust the treble level.
•Press the 
or 
button within 5 seconds to adjust the level after pressing the BASS or TREBLE button.
You can adjust the volume level between 0 and 50.
CAUTION:
•DO NOT turn off the System with the vol- ume set to an extremely high level; other- wise a sudden blast of sound could damage your hearing, speakers and/or headphones when you turn on the System or start playing any source next time.
REMEMBER you cannot adjust the volume level while the System is in standby mode.
Showing the Time (DISPLAY)
(Using the Remote Control)
You can show the current time on the display.
To display the clock, press the DISPLAY button on the Remote Control.
To return to the previous mode, press the same button again.
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers.
Be sure to turn down the volume be- fore connecting or putting on head- phones.
PHONES
•To let the clock work, you need to set the clock first. (See “Setting the Clock” on page 24.)
14
