JVC XL-PV310 Power Supply, Preparations, Using the AC adaptor, Using the car adaptor, e Notes

A			Power Supply
			Preparations
			Using the AC adaptor
	d		Connect the AC adaptor supplied.
			a DC IN jack (DC IN 4.5 V	)
		c
			b Left side panel of the unit

c AC adaptor

d AC power outlet

a

Note:

b

The unit is in the standby condition when the AC adap- tor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.

Using the car adaptor

The XL-PV310 comes with a car adaptor.

For XL-PG31 and XL-PG51, obtain the optional car adap- tor as required.

• Car adaptor (CA-R456)

The car adaptor can be used to recharge the unit’s bat- teries while in a car.

B

Using dry-cell batteries (not included)

After disconnecting the AC adaptor, insert two “R6” (LR- 6) alkaline batteries.

The procedure for inserting and removing dry-cell batteries is identical to that for rechargeable batter- ies.

Battery indicator

eBattery indicator

This indicator flashes on and off when the batteries are almost out of power. Power is cut off completely a short while later.

Rechargeable batteries: Recharge batteries.

Dry-cell batteries: Replace batteries with new ones.

e Notes:

• The length of time the unit can continue further opera- tion after the battery indicator starts flashing differs depending on the type of batteries used.

•The battery indicator may not flash if rechargeable batter- ies, other than those designated by JVC, are used.

Tip:

Turning off the A.S.P. (Anti-Shock Protection) function will save the battery power more or less. For details, see “Anti-Shock Protection (A.S.P.) Function” on page 22.

If the unit malfunctions or freezes during use, disconnect the power source (the AC adaptor and batteries) once. Then, re-connect the power source and continue operation.

8