JVC XL-PV310, XL-PG31, XL-PG51 Using the Unit with Optional Accessories, a d b c e L, Cd/Aux

A

a

db

c

e L

CD/AUX

f R

Using the Unit with Optional Accessories

Using the unit with an audio system

Using a stereo connection cable (not included), you can listen to CDs through your audio system.

•Connect the cable to the amplifier after turning off its power.

•Do not connect the cable to the PHONO jacks on the amplifier.

•Obtain the optional connecting cable if the amplifier comes with mini-phone jacks.

•Adjust the volume level on the amplifier.

aLINE OUT jack,

bStereo connection cable (not included),

cAmplifier, d Left side panel of the unit, e (White), f (Red)

To use player with an optical cable, use the AC adaptor and check that the A.S.P.(Anti-Shock Protection)function is off.

Note:

To obtain original sound, set HBS to “OFF”.

Using the unit with a car audio system stereo

XL-PV310 comes with the car adaptor and car audio cassette adaptor.

•Car adaptor (CA-R456)

•Car audio cassette adaptor (CA-RC6)

To connect to a car audio system:

Connect the car audio cassette adaptor to the unit’s headphones jack. (When doing this, keep the unit’s VOLUME control at a setting minimum position.)

If there is an Aux jack in the car audio system, connect the OUT jack of the CD player with the Aux jack using

a3.5 mm diameter stereo mini-plug signal cord (optional).

Depending on the automobile used, noise may occur, and in that case, it is recommended that a KS-U32 noise filter (optional) be used.

Note:

It may not be possible to use the unit with some types of car stereo owing to restrictions imposed by the construction of the car audio cassette adaptor.

For further details, refer to the instructions of the part concerned.

26