JVC XM-G6 manual Recording onto a Tape, Synchronized recording an MD onto a tape

Continued

4 Press `(playback) button on the cassette deck or TAPE `(playback) button on the remote control.

Once the cassette deck starts playback, the MD recorder detects the audio signals and starts recording.

Each time you press DISPLAY/CHARA. button,

information switches between the remaining time for the MD and the elapsed time for the MD alternately.

•If no sound comes in for more than 30 seconds, Sound Synchronized Recording will stop. “WRITING” appears in the display window, and you can remove the MD by pressing 0(eject) button.

Synchronized recording an MD onto a tape

1 Insert an MD to be played-back into the loading slot, and load a recordable tape.

The MD IN lamp lights orange.

2 Press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control, then press 7 (stop) button immediately to prepare playing back the MD.

3 Press REC MODE button behind the sliding panel to select “SYNC REC>TAPE.”

Recording onto a Tape

You can record an MD onto a tape manually and using the recording mode feature.

•For details on recording operation of TD-UXG6 cassette deck, refer to UX-G6R’s Instructions (pages 26 – 28).

Recording an MD onto a tape manually

1 Insert an MD to be played-back into the loading slot, and load a recordable tape.

The MD IN lamp lights orange.

2 Press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control, then press 7 (stop) button immediately to prepare playing back the MD.

3 Press REC PAUSE button on TD-UXG6 cassette deck to prepare for recording.

4 Press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control.

The cassette deck automatically starts recording, and the information changes as follows:

Track number Elapsed playback time

5 Press 7(stop) button (on either the MD recorder or

the cassette deck) to quit recording as required.

•When all the tracks finished recording, MD recorder and the cassette deck will automatically stop.

4 Press SET button to start recording.

Recording the MD onto the tape starts, and information appears in the display window as follows:

Track number Elapsed playback time

5 Press 7(stop) button (on either the MD recorder or

the cassette deck) to quit recording as required.

•When all the tracks finished recording, MD recorder and the cassette deck will automatically stop.

16