Press 0(eject) button to eject the MD. “WRITING” appears while the editing you have made is being recorded on the MD.
To erase all the characters
Press CANCEL button repeatedly in step 3 above
to erase all the characters, then go to step 6.
7
a) Press DISPLAY/CHARA. button to select the character set you want.
b) Rotate MULTI JOG dial (or press < / > button) to select the correct character, then press SET button.
5 Repeat steps 2 to 4 to correct another characters.
6 Press ENTER button twice to finish correcting the title.
• If you want to cancel the correction, press CANCEL button after pressing ENTER button once in this step.
Enter the correct character.
4
• During Synchronized Recording:
You can assign the disc title, and 15 track titles one after another as recording goes on. The track titles you have entered are automatically assigned to the tracks recorded on the MD in sequential order. If you enter 16th track title or more, they are ignored.
Changing the Title
You can make a correction or change the title.
1 Follow steps 1 to 4 of pages 24 to 25.
2 Rotate MULTI JOG dial or press < / > button to select the character you want to correct.
• Make sure that the character you want to change is blinking.
3 Press CANCEL button to delete the character you have selected in the step 2.
Available Characters
Uppercase and Symbols
(blank) 
Lowercase and Symbols
(blank) 
Numerals
26
