Continued

Recording the External Equipment

When recording from the external equipment, you can select one of the two recording methods — Manual Recording and Sound Synchronized Recording.

Manual Recording — Sound is recorded in stereo (both on the left and right audio channels). You have to operate the MD recorder and the external equipment respectively.

Sound Synchronized Recording — With this method, you can start recording when the sound signals come into the MD recorder (sound is recorded in stereo).

Sound Synchronized Recording will stop automatically if no sound comes in for more than 30 seconds.

If Sound Synchronized Recording will not work correctly

Use the Manual Recording. Sound Synchronized Recording starts automatically when the MD recorder detects sound signals come in. If sound signal is too weak for this unit to detect, Sound Synchronized Recording will not start (or will stop even while the source is being played).

Recording the External Equipment Manually

First of all, make sure the proper cable connections between XM-G6 MD recorder and external equipment (see also page 6 in this manual, and refer to UX-G6R’s Instructions pages 9).

1 Insert a recordable MD.

The MD IN lamp lights orange.

2 Press AUX button to select either analog source or digital source according to the external equipment.

Each time you press AUX button, AUX mode changes between “AUX” and “AUX DIGITAL” alternately.

AUX AUX DIGITAL

3 Press REC PAUSE button on the MD recorder.

The REC indicator on the MD recorder lights red, and the MD recorder switches to the recording-pause mode.

4 Press 6 (play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control.

Selected source and remaining time for recording appear in the display window as follows:

or

5 Make the external equipment start playback in succession.

To stop recording temporarily, press REC PAUSE button or 6(play/pause) button on the MD recorder or MD 6(play/pause) button on the remote control.

To resume recording, press 6(play/pause) button on the MD recorder or MD 6 (play/pause) button on the remote control again.

Each time you press DISPLAY/CHARA. button,

information switches between the remaining time for the MD and the elapsed time for the MD alternately.

6 Press 7 (stop) button on the MD recorder to stop recording as required.

“WRITING” appears in the display window, and you can remove the MD by pressing 0(eject) button.

17

Page 20
Image 20
JVC XM-G6 manual Recording the External Equipment Manually, Insert a recordable MD

XM-G6 specifications

The JVC XM-G6 is a high-performance amplifier that has made its mark in the world of car audio equipment, particularly among enthusiasts looking to enhance their audio experience on the road. Designed with versatility and power in mind, the XM-G6 boasts a range of features that cater to both casual listeners and audiophiles alike.

One of the standout features of the JVC XM-G6 is its robust power output. It delivers an impressive 600 watts of maximum power, enabling users to achieve a dynamic and impactful sound performance. This power output is structured to provide a clean and distortion-free signal, ensuring that even at high volumes, the audio remains clear and enjoyable.

The amplifier operates on a Class D topology, which contributes to its efficiency and compact design. Class D amplifiers are known for their ability to produce high power output with minimal heat generation, allowing for smaller chassis sizes without compromising on performance. This means that the XM-G6 can easily fit into tight spaces within the vehicle without sacrificing audio quality.

Another noteworthy characteristic of the JVC XM-G6 is its adjustable low-pass and high-pass filters. These filters allow users to customize the audio output to their specific preferences, enabling the integration of various speaker setups. Users can easily tune the amplifier to work optimally with subwoofers or full-range speakers, ensuring that each component of the audio system performs to its fullest potential.

The amplifier is also equipped with a bridgeable design, allowing for flexibility in system configuration. Users can connect multiple speakers and subwoofers to create a more complex audio setup, or bridge two channels to drive a single, more powerful subwoofer. This versatility makes the XM-G6 an excellent choice for those looking to build or upgrade their car audio system.

In terms of durability, the JVC XM-G6 features a robust construction designed to withstand the rigors of automotive environments. The amplifier is built with high-quality components that ensure long-lasting performance, reducing the likelihood of failure over time.

In summary, the JVC XM-G6 is a feature-rich amplifier that combines powerful output, efficiency, and versatility. Its Class D design, adjustable filters, and bridgeable channels make it an ideal choice for anyone serious about car audio. With its solid construction and reliable performance, the XM-G6 is a valuable addition to any vehicle's audio system.