Continued

If “TRACK PROTECTED” appears, the selected track has been write-protected by another component. You cannot edit such a protected track. To cancel the editing, press TITLE/EDIT button.

5 Press SET button when you find the point where you want to divide the track.

The MD recorder repeats the selected point — a portion of three seconds length following the dividing point.

If you have selected a wrong track number, press CANCEL button then select the correct track.

6 Rotate MULTI JOG dial ( < / > button also available) to precisely adjust the dividing point.

You can shift the dividing point up to ±128. This range (±128) corresponds to approximately ±8 seconds from the original point (Position 0).

JOIN Function

This function allows you to join two adjacent tracks into one track.

To quit any time during editing process, press TITLE/ EDIT button.

1 Insert an MD you want to edit into the MD loading slot.

The MD IN lamp lights orange.

2 Press TITLE/EDIT button until “JOIN?” appears in the display window.

3 Press SET button.

4 Rotate MULTI JOG dial to select the two adjacent tracks you want to join (< / > button also available ).

5 Press SET button.

When you stop rotating MULTI JOG dial, the system repeats the newly selected dividing point.

7 When you find the right position, press SET button.

“PUSH ENTER” appears in the display window.

8 Press ENTER button to finish the editing procedures.

If you want to cancel the editing, press CANCEL button.

9 Press 0(eject) button to eject the MD.

“WRITING” appears while the editing you have made is being recorded onto the MD.

To join the divided tracks again, see the JOIN function.

If you have selected wrong tracks, press CANCEL button, then select the correct tracks by rotating MULTI JOG dial (< / > button also available).

If you want to cancel the editing, press TITLE/EDIT button.

If “TRACK PROTECTED” appears, the selected track has been write-protected by another component. You cannot edit such a protected track. To cancel the editing, press TITLE/EDIT button.

6 Press ENTER button to finish the editing procedures.

7 Press 0(eject) button to eject the MD.

“WRITING” appears while the editing you have made is being recorded on the MD.

To divide the joined tracks, see the DIVIDE function.

21

Page 24
Image 24
JVC XM-G6 manual Join Function

XM-G6 specifications

The JVC XM-G6 is a high-performance amplifier that has made its mark in the world of car audio equipment, particularly among enthusiasts looking to enhance their audio experience on the road. Designed with versatility and power in mind, the XM-G6 boasts a range of features that cater to both casual listeners and audiophiles alike.

One of the standout features of the JVC XM-G6 is its robust power output. It delivers an impressive 600 watts of maximum power, enabling users to achieve a dynamic and impactful sound performance. This power output is structured to provide a clean and distortion-free signal, ensuring that even at high volumes, the audio remains clear and enjoyable.

The amplifier operates on a Class D topology, which contributes to its efficiency and compact design. Class D amplifiers are known for their ability to produce high power output with minimal heat generation, allowing for smaller chassis sizes without compromising on performance. This means that the XM-G6 can easily fit into tight spaces within the vehicle without sacrificing audio quality.

Another noteworthy characteristic of the JVC XM-G6 is its adjustable low-pass and high-pass filters. These filters allow users to customize the audio output to their specific preferences, enabling the integration of various speaker setups. Users can easily tune the amplifier to work optimally with subwoofers or full-range speakers, ensuring that each component of the audio system performs to its fullest potential.

The amplifier is also equipped with a bridgeable design, allowing for flexibility in system configuration. Users can connect multiple speakers and subwoofers to create a more complex audio setup, or bridge two channels to drive a single, more powerful subwoofer. This versatility makes the XM-G6 an excellent choice for those looking to build or upgrade their car audio system.

In terms of durability, the JVC XM-G6 features a robust construction designed to withstand the rigors of automotive environments. The amplifier is built with high-quality components that ensure long-lasting performance, reducing the likelihood of failure over time.

In summary, the JVC XM-G6 is a feature-rich amplifier that combines powerful output, efficiency, and versatility. Its Class D design, adjustable filters, and bridgeable channels make it an ideal choice for anyone serious about car audio. With its solid construction and reliable performance, the XM-G6 is a valuable addition to any vehicle's audio system.