Continued 
MOVE Function
This function allows you to move a track to the position you prefer. It is useful to change the order of the tracks as you like.
•To quit any time during editing process, press TITLE/ EDIT button.
1 Insert an MD you want to edit into the MD loading slot.
The MD IN lamp lights orange.
2 Press TITLE/EDIT button until “MOVE?” appears in the display window.
3 Press SET button.
4 Rotate MULTI JOG dial to select the track you want to move (< / > button also available).
5 Press SET button.
•If you have selected a wrong track number, press CANCEL button, then select the correct track number again.
6 Rotate MULTI JOG dial to select the position where you want to move the track (< / > button also available).
7 Press SET button.
•If you have selected wrong tracks, press CANCEL button, then select the correct tracks by rotating MULTI JOG dial (< / > button also available).
•If you want to cancel the editing, press TITLE/EDIT button.
8 Press ENTER button to finish the editing procedures.
9 Press 0(eject) button to eject the MD.
“WRITING” appears while the editing you have made is being recorded on the MD.
ERASE Function
This function allows you to erase an unwanted track.
•To stop any time during editing process, press TITLE/ EDIT button.
1 Insert an MD you want to edit into the MD loading
slot.
The MD IN lamp lights orange.
2 Press TITLE/EDIT button until “ERASE?” appears in the display windows.
3 Press SET button.
4 Rotate MULTI JOG dial to select the track you want to erase (< / > button also available).
5 Press SET button.
•If you have selected a wrong track number, press CANCEL button, then select the correct track number.
•If “TRACK PROTECTED” appears, the selected track has been
6 Repeat steps 4 and 5 if you want to erase more tracks (three tracks erasable at a time).
22
