Continued
4 Press 6(play/pause) button on the CD unit.
Each track of the CD starts playing one after another, and stops when the final track has finished playing.
•To stop playing back for a moment, press 6
(play/pause) button on the CD unit.
The playback time starts blinking in the display window.
•To resume playback, press 6(play/pause) button again.
Playback continues from the point where it was stopped for a while.
To go to another track
Before or during playback, press 4 / ¢ button repeatedly:
Press ¢ button:
Skips to the beginning of the next and succeeding tracks.
Press 4 button:
Goes back to the beginning of the current and previous tracks.
Rotating MULTI JOG dial clockwise also changes the tracks forwards quickly, while rotating it counterclockwise the tracks reverse quickly.
< / > button on the remote control is also available to skipping operations.
5 Press 7(stop) button to stop playing back the CD.
Following information for the CD appears in the display window.
Total track number
Total playback time
6 Press 0(open/close) button on the CD unit to remove the CD.
•Pressing 0(open/close) button during playback directly, the CD unit stops playback and opens CD tray.
Programing the Playing Order of the Tracks
— Program Play
You can arrange the order in which the tracks play before you start playback. You can program up to 32 tracks.
1 Place a CD.
•If the current playing source is not the CD, press 6(play/pause) button on the CD unit, then 7 (stop) button before going to the next step.
2 Press PLAY MODE button repeatedly until “CD
PROGRAM” appears in the display window.
Searching and Skipping Tracks
While playing back a CD, you can do the following operations.
To search and skip to a particular point in a track
During playback, press and hold 4/ ¢button to meet the desired passages in a track:
•Each time you press the button, playback mode indicators also change as follows:
PROGRAM 
RANDOM
Canceled 
(Normal play)
Press and hold ¢button:
Fast forwards in the track.
Press and hold 4button:
Fast reverses in the track.
UP/DOWN button on the remote control is also available to searching operations.
3 Rotate MULTI JOG dial to select a track number to be programed (< / > buttons also available).
Track number
Program number
21
