JVC SP-UXG6 Playing Back a Tape - Basic Operation, Press `playback button on the unit or TAPE

Playing Back a Tape

DISPLAY

/CHARA.CANCEL

UP

< SET >

￿ DOWN

MD AUX TAPE ` (playback)

TAPE FM/AM CD￿

7 (stop)

4 / ¢

VOLUME

Buttons behind the sliding panel

DISPLAY	4 ¢	SET			PLAY	REC	TITLE	CLOCK
/CHARA.			CANCEL	ENTER	MODE	MODE	/EDIT	/TIMER

4 ¢

¹(auto reverse) 0(open/close)

DOLBY B NR
REC PAUSE	AUTO
	REVERSE
	REC

DOLBY B NR`(playback) 7(stop)

Tape operation indicators

You can listen to Normal (Type I), High position (TypeII), and Metal (Type IV) type tapes without further settings.

•When using the inner buttons, press OPEN/CLOSE button on AX-UXG6 unit to open the sliding panel first.

•When using the remote control, press TAPE 23 (playback) button first and 7(stop) button successively.

DO NOT use tapes longer than 120 minutes.

The characteristic deterioration may occur and these tapes easily jam in the tape transport mechanism.

Playing Back a Tape — Basic Operation

1 Press 0(open/close) button on the cassette deck unit.

The system automatically turns on and the tape tray comes out.

2 Place a tape on the tray with the side you want to listen to facing up (forward side).

Tape fits in the caved-in area so that an exposed edge of the tape faces toward the inside of the unit.

• DO NOT try to open or close the tape tray by hands as it will be damaged.

•DO NOT place any foreign matters.

•DO NOT prevent the tray from opening and closing, because it may results damages on the unit.

3 Press 0(open/close) button again to close the tray.

4 Press `(playback) button on the unit or TAPE

`(playback) button on the remote control.

The tape playback starts and the tape direction indicator blinks slowly in orange to show the tape running direction.

REC Tape direction indicator

•Each time you press ` (playback) on the cassette deck unit or TAPE `(playback) button on the remote control, you can change the tape sides to be played back currently.

3 : plays the forward side.

2: plays the reverse side.

Playback comes to an end (Auto Reverse)

The cassette deck unit automatically changes the tape direction to the reverse side, and continue playback both sides. Each time to press the button, Auto Reverse feature is set to on/off alternately.

24