JVC XT-UXG6R Adjusting Bass and Treble Sounds, Reinforcing the Bass Sound, To adjust the bass

Continued

•When using the remote control, press VOLUME+ button to increase the volume level or press VOLUME –button to decrease it.

The volume level (from 0 to 50) appears in the display window as follows:

Adjusting Bass and Treble Sounds

You can adjust bass and treble sound effects with the remote control, conforming to your preference and acoustic surroundings.

You can use this effect only while listening sources.

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume level before connecting or putting headphones.

MOS - FET

PHONES jack

AUTO

REVERSE

DO NOT turn off the system with the volume level set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the system or start playing any source.

REMEMBER you cannot adjust the volume level while the system is turned off.

Reinforcing the Bass Sound

The richness and fullness of the bass sound is maintained regardless of how low you set the volume level.

You can use this effect only while listening sources.

•To get the effect, press ACTIVE BASS EX. button on the remote control, and its indicator lights in the display window.

•To cancel the effect, press the button again so that the indicator goes off.

To adjust the bass

1 Press BASS button.

The current level settings shortly appears as follows:

To exit from the level setting, press the button again.

2 Press UP/DOWN button to adjust the level.

•Press UP button to increase the bass tone level.

•Press DOWN button to decrease the bass tone level.

The bass level can be adjusted in seven steps from –3 through 0 to +3 (step “0” makes no effect).

To cancel the effect, adjust the level to “0.”

To adjust the treble

1 Press TREBLE button.

The current level settings shortly appears as follows:

To exit from the level setting, press the button again.

2 Press UP/DOWN button to adjust the level.

•Press UP button to increase the treble tone level.

•Press DOWN button to decrease the treble tone level.

The treble level can be adjusted in seven steps from –3 through 0 to +3 (step “0” makes no effect).

To cancel the effect, adjust the level to “0.”

12