Jwin JD-VD503 manual Connect with TV

R

Connect with TV

1. Normal connection

Use the YUV cords to connect the player with the corresponding ports of the TV set as shown in the picture on the right.

2.Connect with S-Terminal

Connect one end of S-Terminal wire with S-Terminal output socket on this player back-panel and another with the S-Terminal input socket of the TV, and then connect audio wire with the TV.

3.Connect with YUV (Y Cb Cr) Terminal

Connect one end of YUV wire with the Y, Pb/Cb, Pr/Cr socket on the disc player and another with the corresponding Y, Pb/Cb, Pr/Cr socket of the TV. And then connect audio wire with TV. See picture at right.

When you connect the progressive scan TV, press the PROGRESSIVE button on the remote control and if no picture displays on the screen after DVD player loads the discs, switch the video mode of the TV to progressive scan and obtain the picture.

Notes: For normal TV, if you press the PROGRESSIVE button on the remote control, no picture displays on the screen; press PROGRESSIVE button again and it will shift to interlace scan mode. Then all information will resume factory settings after pressing the RECALL button.

VIDEO

S-VIDEO OPTICAL COAXIAL

COMPONENT	5.1CH SURROUND	MIXED
VIDEO OUT	AUDIO OUT	AUDIO OUT

VIDEO

COMPONENT	5.1CH SURROUND	MIXED
VIDEO OUT	AUDIO OUT	AUDIO OUT

12