Jwin JV-DTV17 owner manual Time Menu, Clock, On/Off Time

Time Menu

Clock

You must set the time correctly before using on/off time function.

1.Repeatedly press the MENU button to select the TIME menu.

2.Press the D / E button to select Clock.

3.Press the G button and then D / E button to adjust the hour.

4.Press the G button and then D / E button to adjust the minute.

5.Press the EXIT button to save and return to TV viewing.

On/Off Time

The off timer automatically switches the set to standby at the preset time.

1.Repeatedly press the MENU button to select the TIME menu.

2.Press the D / E button to select Off Time or On Time.

3.Press the G button and then D / E button to select Run.

4.To cancel Off/On Time function, press the D / E button to select Hold.

5.Press the G button and then D / E button to adjust the hour.

6.Press the G button and then D / E button to adjust the minute.

7.Only On time function ; Press the D / E button to adjust volume level and programe number.

8.Press the EXIT button to save and return to TV viewing.

Note :

a.In the event of power interruption (disconnection or power failure), the clock must be reset.

b.Two hours after the set is switched on by the on time function it will automati- cally switch back to standby mode unless a button has been pressed.

c.Once the on or off time is set, these functions operate daily at the preset time. d.Off Timer function overrides On Timer function if they are set to the same time. e.The set must be in standby mode for the On Timer to work.

Clock	-i-i:i-i-AM	Clock
OffOtimer		OffOtimer	-i-i:i-i-AM
OnOtimer		OnOtimer
		AutoOoff	TVO3
AutoOoff			VolOO30
			Run
()MoveO}{AdjustOMENU		()MoveO}{AdjustOMENU

24