PC in socket (D-Sub jack)
1.Connect the signal cable from the monitor output sock- et of the PERSONAL COMPUTER to the PC input socket of the set.
2.Connect the audio cable from the PC to the PC SOUND sockets of the set.
3.Press the INPUT SELECT button to select PC.
4.Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
Note : If you have an Apple macintosh, connect the VGA desktop block (not supplied) from the 3 row 15 pin to 2 row 15 pin with the signal cable and connect the VGA desktop block to the Macintosh.
Displayable Monitor Specification
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Proposed |
| Resolution |
|
|
|
|
|
| Pixel clock(MHZ) |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DOS |
| 720x400 |
| 37.9KHz |
| 70Hz |
| 35.50MHz | ||||
| VESA(VGA) |
| 640x480 |
| 31.5KHz |
| 60Hz |
| 25.17MHz | ||||
| VESA(VGA) |
| 640x480 |
| 37.9KHz |
| 72Hz |
| 31.50MHz | ||||
| VESA(VGA) |
| 640x480 |
| 37.5KHz |
| 75Hz |
| 31.50MHz | ||||
| VESA(SVGA) |
| 800x600 |
| 35.1KHz |
| 56Hz |
| 36.00MHz | ||||
| VESA(SVGA) |
| 800x600 |
| 37.9KHz |
| 60Hz |
| 40.00MHz | ||||
| VESA(SVGA) |
| 800x600 |
| 48.1KHz |
| 72Hz |
| 50.00MHz | ||||
| VESA(SVGA) |
| 800x600 |
| 46.9KHz |
| 75Hz |
| 49.50MHz | ||||
| VESA(XGA) |
| 1024x768 |
| 48.4KHz |
| 60Hz |
| 65.00MHz | ||||
| VESA(XGA) |
| 1024x768 |
| 56.5KHz |
| 70Hz |
| 75.00MHz | ||||
| VESA(XGA) |
| 1024x768 |
| 60.0KHz |
| 75Hz |
| 78.75MHz | ||||
| VESA(SXGA) |
| 1152x864 |
| 67.5KHz |
| 75Hz |
| 108.00MHz | ||||
VESA(WXGA) |
| 1280x768 |
| 47.7KHz |
| 60Hz |
| 80.136MHz | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Synchronization input form : separate)
Note :
a.If the set is cold, there may be a small “flicker” when the set is switched on. This is normal, there is nothing wrong with the set.
b.If possible, use the VESA 1,024x768@60Hz video mode to obtain the best image quality for your LCD monitor. If used under the other resolutions, some scaled or processed pictures may appear on the screen. If used to PC vertical frequency 85Hz, some noise can be seen when PIP is on. In this case, set the PC vertical frequency to 60Hz. The set has been pre- adjusted to the mode VESA 1,024x768@60Hz.
c.Some dot defects may appear on the screen, like Red, Green or Blue spots. However, this will have no impact or effect on the monitor performance.
d.Do not press the LCD screen with your finger for a long time as this may produce some temporary distortion effects on the screen.
e.When the PC screen appears on the set, a message may appear on the screen, and the message will differ according to the Window system version (Win98, 2000). If a message appears click “Next” until the mes- sage finishes.
f.If the message “ out of Range” appears on the screen, adjust the PC as in the ‘Displayable Monitor Specification’ section.
Connection of PC
EN
29
