Jwin JX-M89 instruction manual Compliance of FCC Rule, Splash Resistance, Audio CD, Disc Error

SPLASH PROOF AM/FM Radio with CD Player V10M10_IM_EN_08132007

USER SAFETY GUIDE

COMPLIANCE OF FCC RULE

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

SPLASH RESISTANCE

This unit has been constructed to resist mild steam and light splashes from the shower or bath only. It should not be operated under running water and under no circumstances should it be fully immersed in water. This unit isn’t a water-resistant device.

Compatibility

AUDIO CD	1.	Disc Size: 12cm / 8cm
	2.	Disc Type: CD

DISC ERROR

This compact disc player has built-in error compensation circuits to correct for minor defects in a disc. There are limits, however, to the amount of correction available. In some cases, the CD player may skip some tracks, or parts of tracks, on a disc during disc play. This problem may be caused by defects (such as scratches) in the disc being played, which are too large for the error compensation circuits to handle. If you encounter this problem, try a new disc before having the unit serviced. If the CD player operates normally, the skipping problem is probably due to a defective disc.

Note: Only the above types of discs can be played on this unit. Some CD-R, CD-RW discs cannot be played depending on the condition of the player and the disc.

3www.jWIN.com

SPLASH PROOF AM/FM Radio with CD Player V10M10_IM_EN_08132007

OPERATIONAL INSTRUCTIONS

Repeat and Intro Functions-continued

4.To play the audio tracks in the random order, press the P.MODE button until the indication “RDM” appears on the LCD screen. The random function is disabled in the programmed play mode.

Programmed Playback

The PROGRAM function allows your favorite tracks to be played in a programmed sequence. This feature can be set in the stop mode or normal play mode.

1.Press the PROGRAM button to start programming. The indication “PGM” and track number “01” start blinking on the LCD screen.

2.Use the SKIP ( / ) buttons to select your desired track.

3.After selecting the track, press the PROGRAM button to save the selected track in the memory. The indications “PGM” and “02” will appear on the screen and blink while waiting for the next input.

4.Repeat step 2 and 3 to program more tracks. You can program up to 20 tracks into the memory in any sequence order.

5.To check the programmed tracks, press the STOP button and then PROGRAM button. Each press of the PROGRAM button will show the programmed track accordingly on the LCD screen.

6.Press the PLAY / PAUSE () button to start the programmed playback.

7.To cancel the programmed play, press the STOP button twice.

Listening to Radio

1.Set the FUNCTION select switch to the "RADIO" position.

2.Set the BAND select switch to either "AM" or “FM”.

3.Adjust the TUNING knob to obtain the desired radio station.

4.Adjust the VOLUME control knob to obtain the desired sound level.

5.To turn off the radio, set the FUNCTION select switch to the "CD" position.

8www.jWIN.com