Chapter2 Fault Descriptions
WLSE Fault
2-20
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
WLSE FaultAAA Server Faults
Table2-2 WLSE Fault
Fault Description Explanation Related Setting Recommended Action
Dot11mib view is
not enabled on
some Access
Points. Please
consult online help
for details
The device is not configured
with the iso (dot11 mib) view,
and cannot be managed
effectively by the WLSE.
This can cause some WLSE
report information to be missing
and some WLSE faults may not
be generated.
When this fault has been cleared,
the following message displays:
No Dot11mib view
misconfigurations detected.
Manage Fault
Settings >
Thresholds >
WLSE >
Dot11mib view
enabled
Configure the devices and
the WLSE as described in
Devices are placed in
Misconfigured Devices
group after discovery and
dot11mib fault is
displayed., page1-16.
Tab le 2- 3 Se rv e r Fa u lt s
Fault Description
Server
Type Explanation Related Setting Recommended Action
Authentication
failed. Please
check EAP-MD5,
LEAP, PEAP, or
RADIUS
credentials
EAP-MD5 The server is
reachable but the
credentials are
incorrect.
When this fault has
been cleared, the
following message
displays:
Authentication
succeeded
Manage Fault
Settings >
Thresholds >
EAP-MD5 /LEAP/
PEAP/RADIUS>
Response Time
Make sure that the
credentials are set
correctly by selecting
Devices > Discover >
AAA Server.