Chapter 2 Fault Descriptions

 

 

 

 

Access Point Faults

 

Table 2-1 Access Point Faults (continued)

 

 

 

 

 

 

 

 

 

Fault Description

Type

Explanation

Related Setting

Recommended Action

 

 

 

 

 

 

PSPF is disabled

Non-IOS

The PSPF port has

Manage Fault

Log in to the access point

 

 

been disabled.

Settings >

and enable the PSPF

 

 

PSPF (Publicly

Security

setting.

 

 

Policies >

 

 

 

 

Secure Packet

 

 

 

 

PSPF Enabled

 

 

 

 

Forwarding) is a

 

 

 

 

 

 

 

 

 

feature that

 

 

 

 

 

prevents client

 

 

 

 

 

devices associated

 

 

 

 

 

to a bridge or

 

 

 

 

 

access point from

 

 

 

 

 

inadvertently

 

 

 

 

 

sharing files with

 

 

 

 

 

other client devices

 

 

 

 

 

on the wireless

 

 

 

 

 

network.

 

 

 

 

 

When the fault is

 

 

 

 

 

cleared, the

 

 

 

 

 

following message

 

 

 

 

 

displays: The PSPF

 

 

 

 

 

is enabled.

 

 

 

 

 

 

 

 

 

Retry Count rate is

Non-IOS

The fault threshold

Manage Fault

Verify that the fault

Degraded number per

and IOS

set for the degraded

Settings >

threshold is set correctly.

minute

 

state has been

Thresholds >

If the threshold is set

 

 

exceeded.

Access Point >

 

 

correctly, review your

 

 

 

Max Retry

 

 

When the fault is

network to determine the

 

 

Counts

 

 

cleared, the

action necessary to clear

 

 

 

 

 

following message

 

the fault condition.

 

 

displays: Retry

 

 

 

 

 

Count rate is OK

 

 

 

 

 

 

 

 

 

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

2-13

Page 63
Image 63
Cisco Systems 2.5 manual Fault Description Type Explanation