Cisco Systems 2.5 manual Peap

Chapter 2 Fault Descriptions

					AAA Server Faults
Table 2-3 Server Faults (continued)
	Server
Fault Description	Type		Explanation	Related Setting	Recommended Action
PEAP server is	PEAP		The PEAP server is	Manage Fault	Check the server
not available			not available.	Settings >	configuration.
			When this fault has	Thresholds > Peap >
				Response Time
			been cleared, the
			following message
			displays: PEAP
			server is available
PEAP server is	PEAP		The fault threshold	Manage Fault	Verify that the fault
Degraded			set for the degraded	Settings >	threshold is set
			state has been	Thresholds >	correctly.
			exceeded.	Peap > Response	If the threshold is set
				Time
			When this fault has		correctly, review your
			been cleared, the		network to determine
			following message		the action necessary
			displays: PEAP		to clear the fault
			server is OK.		condition.
PEAP server is	PEAP		The fault threshold	Manage Fault	Verify that the fault
Overloaded			set for the overloaded	Settings >	threshold is set
			state has been	Thresholds > Peap >	correctly.
			exceeded.	Response Time	If the threshold is set
			When this fault has		correctly, review your
			been cleared, the		network to determine
			following message		the action necessary
			displays: PEAP		to clear the fault
			server is OK		condition.
Radius server is	PEAP		The RADIUS server	Manage Fault	Check your server
not available			is not available.	Settings >	configuration.
			When this fault has	Thresholds >
				Radius > Response
			been cleared, the
				Time
			following message
			displays: Radius
			server is available
		FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

2-23