2-17
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
Chapter2 Fault Descriptions
Access Point Faults
Telnet access is
enabled
Non-IOS Telnet has been
enabled on the
access point.
When this fault has
been cleared, the
following message
displays: Telnet
access is disabled
Manage Fault
Settings >
Security
Policies >
Telne t
Disabled
Log in to the access point
and disable the Telnet
access setting.
User capabilities are
not enforced
Non-IOS The enableUserMgr
setting is not set on
the access point.
When this fault has
been cleared, the
following message
displays: User
capabilities are
enforced.
Manage Fault
Settings >
Security
Policies > User
Manager
Enforced
Log in to the access point
and enable the User Mgr
setting.
Vlan WEP key length
policy violation
Non-IOS
and IOS
The WEP key
length per VLAN
setting has been
violated.
When this fault has
been cleared, the
following message
displays: Vlan
WEP key length is
ok.
Manage Fault
Settings >
Security
Policies > WEP
Encryption per
Vlan
Make sure the WEP key
length selected in the
policy setting matches the
access point settings.
Table2-1 Access Point Faults (continued)
Fault Description Type Explanation Related Setting Recommended Action