Cisco Systems 2.5 manual Access point, Ssid

Chapter 2 Fault Descriptions

Access Point Faults

Table 2-1 Access Point Faults (continued)

Fault Description	Type	Explanation	Related Setting	Recommended Action
SSID policy violation	Non-IOS	The SSID entered	Manage Fault	If you configured
SSID assigned to the	and IOS	in the WLSE is	Settings >	different SSIDs among
access point		different from the	Security	managed access points,
		SSID assigned to	Policies >	you need to enter all of the
		the access point.	SSID	SSIDs, or this fault will be
		When the fault is		generated for access
				points whose SSIDs are
		cleared, the
				not listed.
		following message
		displays: SSID is
		valid.
		The access point is		Make sure that you have
		configured with an		entered authorized SSIDs
		unauthorized SSID.		in the SSID policy.
				Change the SSID on the
				access point to an
				authorized SSID.
	IOS	The SSID policy for	Manage Fault	Enable the access point’s
		an IOS access point	Settings >	guest mode.
		is enabled, but the	Security
		“guest mode” is	Policies >
		disabled. This	SSID
		causes the access
		point to send an
		SSID made up of all
		zeros and equivalent
		to the length of the
		first configured
		SSID.

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

2-16