Kambrook KEF16 manual Kambrook Safety

Models: KEF16

1 16
Download 16 pages 53.31 Kb
Page 2
Image 2

Kambrook Safety

Welcome to Kambrook and your new Banquet Frypan. At Kambrook we believe that the safe performance of our products is the first priority in any consumer product so that you, our valued customer, can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions:

READ ALL INSTRUCTIONS THOROUGHLY BEFORE ACTIVATING THE APPLIANCE AND RETAIN THEM FOR FUTURE REFERENCE.

Ensure that the power source to be used is the same as the voltage requirements of the product.

Switch off at the power outlet and then unplug and remove the Temperature Control Probe when the appliance is not in use and before cleaning.

Allow all parts to cool before dissembling for cleaning.

Never immerse the power cord, plug or temperature control probe in water or any other liquid.

Before inserting the Temperature Control Probe into the Frypan socket ensure the interior of the socket is fully dry.To do this, shake out excess water then wipe the interior of the socket with a dry cloth.

Do not touch hot surfaces, use handles or knobs

This appliance is not intended for use by young children or infirm persons without supervision.

Young children should be supervised to ensure that they do not play with the appliance.

Do not leave the appliance unattended when in use.

Always use the appliance on a dry, level surface

Do not let the cord hang over the edge of a table or counter, touch hot surfaces or become knotted.

Do not place this appliance on or near a hot gas or electric burner, or where it could touch a heated oven

This appliance is for household use only. Do not use this appliance for other than its intended use. Do not use outdoors.

Extreme caution must be taken when using this appliance filled with hot oil or other liquid. Do not move during cooking and allow to cool before removing oil or other liquid.

The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.

Regularly inspect the power cord, plug and actual appliance for any damage. If found damaged in any way, immediately cease use of the appliance and return the entire appliance to the nearest authorised Kambrook Service Centre for examination, replacement or repair. Please call 1800 800 634 for Kambrook Service Centre details.

2

Page 2
Image 2
Kambrook KEF16 manual Kambrook Safety