HD 4000 C / HD 6000 C
H. Accessories
English
Handguns with different spray lances
Dependent on the cleaning application, different spray lance extensions are required, ranging from 250 mm for one- hand operation to 2040 mm for cleaning high objects.
Spray lance with bypass valve
Featuring two spray patterns and operation in conjunction with cleaning detergents, length approx. 1000 mm.
Nozzles
Several nozzles with different spray angles are available for the system. The nozzles are mounted on the spray lance by means of a union nut, and are easily changed. Recommended nozzle size is size 07.
Designation | Spraying | Order no. |
| angle | 6.415- |
|
|
|
1507 | 15° | |
|
|
|
2507 | 25° | |
|
|
|
4007 | 40° | |
|
|
|
Force of recoil from the handgun when using these nozzles:
HD 4000 C | 100 bar | 43 N |
|
|
|
HD 6000 C | 60 bar | 25 N |
|
|
|
The spraying device (i.e., handgun) is connected by means of an
System tap / workstation
Features injector for metering cleaning detergent into pressure side,
Hot-water accessory kit
This accessory kit permits an increase of the water supply temperature to
a maximum of 80°C.
Cleaning detergents
Cleaning detergents facilitate any cleaning task. A selection of cleaning agents is listed in the table on the following page. When using detergents it is essential to observe the instructions supplied on the product labels.
The following types of cleaning detergents must not be used with this system:
•Detergents containing nitric acid
•Detergents containing active chlorine
Using these types of detergents will result in damage to unit components.
H1 |
