English
A. For Your Safety
HD 4000 C / HD 6000 C
1. System Operating Hazards
This system is equipped with an overpressure protection feature which was subjected to a safety inspection. Improper operation or abuse of this feature constitutes an hazard to health and life of the operator and/or third persons.
Any persons charged with the installation, commissioning, operation, maintenance or service of the machine are obligated:
nto be appropriately qualified
nto diligently observe these Operating Instructions
2.Safety Instructions and Information
Throughout the present Operating Instructions the following symbols are used:
!Danger!
Denotes an immediate and present danger. Failure to observe this notice could lead to severe injury or death.
Caution!
Denotes a potentially hazardous situation. Failure to observe this notice could lead to minor injuries or property damage.
i Important!
Denotes operating hints and important information.
3. Danger Sources
Sections of the water volume contained in the system are under high pressure. High- pressure water jets may exit from damaged system components, posing injury and/or scalding hazards.
General Hazard Overview
!Danger!
nInjury hazard through exiting water jet of
nBurn injury hazard through hot system components.
During
nInjury hazard through flying debris. Flying debris or objects can cause injury to persons or animals. Never aim the water jet at fragile or loose objects.
nExplosion hazard
The use of this system in enclosed indoor areas is prohibited.
nExplosion hazard
Injury hazard arising from system damage.
Beside water, no other liquid media may be used. This also precludes the introduction of flammable or corrosive liquids to the system.
nHealth hazard through cleaning detergents.
Due to the possible adding of detergents to the system water, the water exiting from the system must not be used as drinking water.
A1 |
