English | User Instructions | KMR 1250 B | |
Troubleshooting |
|
| |
|
|
| |
Fault | Possible cause | Remedy | |
|
|
| |
Engine does not start | Battery discharged | ||
|
|
| |
| No fuel in tank | Fill up with fuel | |
|
|
| |
| Fuel tap closed | Open fuel tap | |
|
|
| |
| Low oil level | Fill up with oil | |
|
|
| |
Machine does not move | Hand lever | Set hand lever to ON - see | |
| torque converter is at OFF | chapter on pushing the | |
|
| sweeper by hand | |
|
|
| |
Main brush roller and side | Inform Customer Service | ||
brush |
|
| |
Check | |||
| |||
|
| adjust | |
|
|
| |
| Main brush roller or side brush | Remove tape | |
| blocked with tape or similar |
| |
|
|
| |
Dust generation when | Seals on the machine worn, filter | Replace seals, mount filter | |
sweeping | not installed correctly or | correctly/replace | |
| defective |
| |
|
|
| |
| Lever for sweeping mode | Set lever to “dry” | |
| wet/dry set to wet |
| |
|
|
| |
| Blower fan is not rotating | Check | |
|
|
| |
| Filter is blocked | Clean or replace filter | |
|
|
| |
Machine sweeps badly | Brushes worn out | Replace | |
|
|
| |
| Waste hopper is full | Empty waste hopper | |
|
|
| |
| Sweeping pattern wrongly | Adjust sweeping pattern | |
| adjusted |
| |
|
|
| |
Fuse defective | Change fuse or inform | ||
function |
| Customer Service | |
|
|
| |
| Switch defective | Inform Customer Service | |
|
|
| |
| Hydraulic unit is defective | Inform Customer Service | |
|
|
| |
Machine moves forwards | Neutral position not correct | Inform Customer Service | |
or backwards when drive |
|
| |
pedal is released |
|
| |
|
|
|
50