KMR 1250 B | User Instructions | English |
Starting the sweeper
Initial driving trials
Carry out initial driving trials in an area where there is plenty of free space until you are familiar with individual operating controls and their functions.
All indications of direction (right/left, front/rear) are given in relation to the direction of travel as seen from the driver’s seat.
nSit down on the driver’s seat.
The engine cannot be started until the driver has sat down (seat contact switch). As soon as driver gets up from the seat, the engine switches off (safety
nMake sure that
–the LH side brush (if fitted) is in the raised position,
–the RH side brush is in the raised position,
–the main brush is in the raised position.
nSet the throttle lever to the middle position
[ 
] (operating speed).
nPull out the choke [ 
] .
nTurn the ignition key to the start position [
].
nWhen the engine has started running, set the control for the choke back to its home position.
Moving off and sweeping
nLower the main brush [
] and, if required, the side
brush as well [
].
nRelease the parking brake [ 
]
–push the lever towards the front.
nSlowly depress drive pedal
–depress right pedal, machine travels forwards
–depress left pedal, machine travels backwards.
Whichever drive pedal is being used at the time, the driving speed can be uniformly and smoothly regulated backwards or forwards. Avoid jerky operation of the pedals, as the hydraulic system could suffer damage in this way.
35
